Question about Hitachi 43FDX01B TV

1 Answer

Red light on, no picture

The red light is ON. Sometimes it can switch to green light using the remote but will revert to red after 10 secs. Quite often by using the push ON and OFF usging switch on the front of the TV, the picture will come on and work for a few weeks before showing the same symtom again. Now after 1 year from the first incidence, the TV will not turn on no matter what I do. Is it worth to repair??

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 42 Answers
Re: red light on, no picture

Cause: IK04,IK05,I601,C614

Posted on Jan 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Need the code to set the technika remote to ma toshiba telly

Maybe you could try the auto-set. Found this using google:
Auto code search

1. switch on the TV and select a channel eg. Bbc1 on the TV itself
2. press the appropriate device button eg. TV
3. press the green SET button for approx 5 seconds until the red light comes on.
4. release the green SET button and point the remote at the device to be controlled, the remote will emit a test signal about every 2 seconds.
5. when the TV switches itself off briefly press the green SET button to store the code found.
6. when the red light goes out the search is ended.
7. try out the remote if it works follow the same steps to set it to other devices eg. DVD. If it does not work follow the steps again.
cover other remote sensors on other devices when setting the remote.

Apr 01, 2010 | Standard (CRT) Televisions

1 Answer

I accidently sat on remote for centrex t.v now all i have is a blue screen and a red padlock sign, how do i unlock

pls check hideen key on remot cantrol
try digit key [- - -] preesing 3 to 5 sec. and see key lock is off than re set preesing 3 to 5 sec and see on the screen tuning lock is off
lock key on remot cantrol pls. press 5 to 10 sec.and see the screen red padlock is opan or green then try remot cantroll any function use normaly

Oct 26, 2009 | Standard (CRT) Televisions

1 Answer

Beovision 3 (8803) standby ok - no picture - no sound

if you know how to use soldering iron,try to resolder your tv,especially the jungle,regulator and the horizontal section.if not working, check the output transistor a square black plastic w/ 3 legs at the back of the plyback.

Jul 29, 2009 | Standard (CRT) Televisions

1 Answer

Tv - jvc av28ct1eks model

Re JVC AV28CT1EKS reverting to standby, Try changing C521. pt number QFZ0200-302 Good luck! Nick

Jun 08, 2008 | JVC Standard (CRT) Televisions

1 Answer

Sky code for remote

The code for you sky remote is 0125.

4 digit' method

1. Turn on your TV.

2. Press tv on your Sky remote control.

3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.

4. Press tv on your Sky remote control again.

5. Key in the Brand Set code for your brand of TV then press select. The light on the Sky remote control blinks twice.
If the light blinks once only, re check the code for your TV and start again at step 1.

6. Press the on/off button (power-top right button on your Sky remote control).

If your TV switched off, press select . The light on the Sky remote control blinks twice.

If your TV did not switch off, press tv , then press the on/off button. Repeat this (press tv , then on/off) until your TV turns off, then press select.

If the light on your Sky remote control blinks three times, your Sky digibox has checked all the possible settings for the code you used. Check that you have the right 4 digit code and start again at step 1.

7. Press tv guide .
If you see the TV Guide screen, the remote control setup process is complete.

If you did not see the TV Guide,you must now set the TV Guide function as follows:

8. Press tv on your Sky remote control.

9. Hold down select and the green button together for about two seconds, until the red light on the Sky remote control blinks twice.

10. Key in the number of the channel on your TV that you use for watching satellite TV (For scart switching, this may be one of the other buttons on your remote e.g. help, i or a colour button).

11. Press select on your Sky remote control. The red light blinks twice. The remote control setup process is complete.

Feb 13, 2008 | Standard (CRT) Televisions

1 Answer

Blinking Stand By/Timer LED

You can try this on the remote in standby mode, meaning tv plugged in but set off. Press Display,5,vol+,power on remote.Press each button within a 1 sec interv. Next the CRT display the item being adjusted. Press 1or4 on remote to select item. 3or6 to change the data. Press Muting then Enter to write into memory. Service Reset muting green enter red. Press 8 then enter on remote to initialize. turn set off to exit. wait least 10 sec. before turning back on.

Sep 10, 2007 | Sony KV-32V40 32" TV

3 Answers

Dlp tv will not "fire up"

if your tv is on warranty take it back to the supplier.the problem with your tv is in the power supply there is a open regulator in that circuit along with the H .O. Transistor there is a black that feeds from the HOT to the flyback which also needs to check probably it is also open.good luck my friend

May 06, 2007 | Samsung DLP HL-P5663W 56" TV

1 Answer

Auxiliary button on tv remote (I believe) needs off and I can't get figure out how...

The remote should have TV, VCR, AUX and maybe CABLE buttons at the top, one of which will light up when any button is pressed. Since it is a universal remote, the button at top lights up to let you know what mode it is in. If the AUX button lights up when any button is pressed, it means the remote is currently set to the AUX mode. To set it back to TV, simply press the TV button at the top. This puts the remote back in the TV mode and the TV button should now light up when any button is pressed. If that works and you are using a cable box with that set, then make sure the TV is on channel 3 by pressing 3 ENTER.

Sep 21, 2006 | Zenith C27A24T 27" TV

2 Answers

TV won't turn on

The red light instead of green is an indication that theres a voltage missing or an improper voltage in the sweep or main power supplys. This should be handled by a trained service tech. Good Luck

May 28, 2006 | Durabrand DWT2704 TV

Not finding what you are looking for?
Hitachi 43FDX01B TV Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66352 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Hitachi Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides