- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it is an external web cam , it should have a USB connector . If so , simply plug it into your laptop from your desktop..(after windows is fully loaded and your computer is in a "calm" state .) Your computer should recognize the web cam and will attempt to load drivers for it . If your web cam came with a installation disk , install it first . Select installation or setup from the CD menu and follow the directions to install the web cam .
i read up about it and turns out that that model turned out unsuccfull cause it was verry easy to lose data wipe the system cause a code error and dropping usially stuffed it up 2 but try this anyways if u have a docking station plug it in than make sure its off first then turn on make sure u conect it to the computer when it reads the camra on computer then remove it then replug it back in and open the camra to the computer leave it runing on for 5 or 10 mins if your camra is stuffed it will show this message An error occurred in the io-library ('Could not claim the USB device'): Could not claim interface 0 (Operation not permitted). Make sure no other program or kernel module (such as sdc2xx, stv680, spca50x) is using the device and you have read/write access to the device.» or u simply have jammed the lense and broken the motor works in the camera jaming the lens can cause a programing loop in the hardware and software i think the best way to fix it would be to incert the CRV3; 2-AA lithium charger in and out a few times to stop the programing loop by a certian amount of electric voltage current that will shock ur programing system to automatically correct its self you should have a flash memory built in and a SD/MMC card make sure that its incerted it will help stop any programing functions by automaticly sending data to the hard disk flash memory forcing the program to work basickly try forcing programs to pick up the camra software like the printer dock the usb cable and the av cable if none works it basickly stuffed thoe u can hack it but seriously if u dont knw what ur doing don try lol so yeaa thats about all i can do for u if you understand programs and software and can hack heres a link youll just have to search in for the latest post on the download link http://forums.dpreview.com/forums/read.asp?forum=1011&message=20329748 this allso allows u to do a load more with ur camra like super zooming , auto face detect , more video effects ,extending a flash memory to ur internal memory and **** like that lol write bakk l8ers aii hope it works
First, check to make sure that the webcam is enabled in the Bios. Once this verified (and if you do not have the driver installed), go to forum.eeeuser.com and search for the webcam driver for your model.
If it is a cam corder, a lot of them only work for stills once hooked up to the PC (via USB). Are you certain the cam be used via a computer. If the camcorder contains both USB and IEE1394/firewire and your computer has both USB and firewire, then sometimes the USb interface is set to stills only and the firewire interface is set to motion only. Which make/model?
I am having a similar problem. I put mine in its dock, connected the USB cable to my computer, and pressed the USB button on the dock. The light turned green and after 30 or so seconds, the message Check Connections came up on the camera.