Question about OKI C5500n Printer

1 Answer

Printing problems I print a document, it sends the information to the printer. Indicates that it has been printed, but it didn't.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • OKI Master
  • 1,113 Answers
Re: printing problems

Sounds like driver is not installed correctly, delete and reinstall (or set printing port correctly)

Posted on Jan 13, 2008

2 Suggested Answers

  • 24 Answers

SOURCE: Hp laserJet 4250.

Replace the print driver on the computer. You can download the latest print driver from Goto Software/Driver dwnld section.

Posted on Jul 12, 2009

  • 71 Answers

SOURCE: printer indicates catridge error

we need to perform a reset, it will take the pritner to the factory settings and this may help you,
the process of reset goes like.
unplug the power cable from the pritner >
then press and hold down the # key and 6 key >
while pressing and holding these keys plug in the power cable back into the printer and wait for 20 secs and then release the buttons..
after this the printer will re-initialize and this might take few minutes.. so wait untill it finishes and follow the onscreeen instruction as well.(if any)

Posted on Nov 04, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Cancel print job with a linux operating system

You've sent a print job to your printer and the green light is blinking, but the printer is not printing. The light blinks for a very long time.
The blinking light indicates that the printer is recieving your print request and will print shortly. If the document you are attempting to print is very large or contains many graphics or images, the printer must spool this data into its memory before printing. This can take quite a bit longer than usual. PDF files are notorious for taking longer than other document types.

In this case, it is best to wait a period of time before taking action. Give the printer 10 minutes and see if it prints.

If it does not print within this window of time, do the following.

1. In the bottom right corner of your screen, you will see a small printer icon. Double click on this icon to open the printer job menu.
2. You will see your print job located there, with other information, including its status.
3. Select the job by right clicking on it and select Cancel.
4. The job should cancel itself.
5. Unplug the printer, removing all power and leave it sit for a couple of minutes.
6. Plug the printer back in and allow it to go through its start up phase until the "Ready" indicator light is solid. This indicates that the printer is ready to recieve jobs.
7. You may now attempt to print again.

HP Printer Support

Jul 16, 2014 | HP Printers & Copiers

1 Answer

I am unable to print documents from my HP 2600n laserjet printer. The only item that I have been able to print today is a couple of TEST copies. Otherwise, I have not been able to print any documents. I...

Thanks for posting to Fixya and it is my pleasure to guide you.

Since you have been able to print test copies, that tells you that your printer is working.

1. Did you print the test from the front of the printer, from the control panel or from a document?
a. If you printed from the printer then
b. test print from the control panel Printers & Faxes then
c. from a document.

1.a. From control panel, double click on Printers & Faxes. Click on the printer that has a check mark, indicates your primary printer, and right click and properties. Click the Print Test page at the bottom. If you get a test page then goto

1.b. Open Word and type the phrase "Test Print" in the document. Click File and Print. Look at the top of the dialog under Printer. You should see your printer name. If not, click to arrow at the right and pick you printer name from the list. Then click OK to send the document to the printer. If you get the page to print then you are done. You should be able to print from any source.

4. If that did not solve the problem then be sure to write down any errors or numbers and post back.

Good luck and please post back that you are successful and click thumbs up of your success or that I can be more helpful.

Good luck and please post back that you are successful and click thumbs up of your success or that I can be more helpful.

Jun 06, 2011 | HP Color LaserJet 2600n Printer

1 Answer

The power and paper light keeps flashing

This could mean that a 2-sided document was sent to the printer and the printer is waiting for the page(s) to be reinserted to print on side 2. Check your documentation or the HP support page
for more information.

The power light blinking indicates the printer is preparing to print a document. The resume light indicates 1) needs paper, 2) a paper jam anywhere in the printer, or 3) the ready to print side 2 of the document.

I hope this helps.

Cindy Wells

Dec 06, 2009 | HP DeskJet 3820 InkJet Printer

1 Answer

Printer's printing black instead of colored.

the printer is fine its the computer that you are printing from that is giving the wronge information. try reinstalling it onto that computer. and check that the background on the word documents are not black on print prevew first. or you have not chosen on the program you are printing from there is not a background colour that needs sending to the back.

Mar 26, 2009 | HP DeskJet 3745 Printer

1 Answer

Epson model CX4800 - will not print anything from "word"

I can't say I've experienced this problem myself but a little google searching indicates you are not alone.

The problem is not your printer but WordPerfect.

This troubleshooting document may help:

My guess is that the steps titled:
- Restore WordPerfect stored printer information
Add the Print Engine to the Startup Folder
- Enable Bidirectional Support for the Printer

... are going to be the most relevant.

Hope that helps.

Feb 15, 2009 | Epson Stylus DX6050 All-In-One InkJet...

2 Answers


spooling, is where the information being sent to the printer is being checked/converted for the printer driver , prior to being printed

Jan 27, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

2 Answers

I have (4) documents to print, but it won't print. It says: 4 document(s) pending owner

To cancel a print job in Windows you can use one of the following two methods:

When you send a print job to the printer, the Status Monitor will appear in the bottom right corner of your screen. Another printer icon for the PROGRESS METER will also appear in the taskbar while printing is taking place. This PROGRESS METER is there so you can manage print priorities or cancel print jobs.

1. Highlight the print job in the PROGRESS METER box.
2. Click on DOCUMENT and CANCEL, or, right click on the job name and left click CANCEL or DELETE.
3. Confirm cancelling the print job.

If no PROGRESS METER appears, you can access the document queue in this fashion:

2. Right click on your Epson printer name, left click PURGE PRINT JOBS (98,ME), or CANCEL ALL DOCUMENTS (2000,XP). (Or, double-click on the printer name to see and modify the status of documents in queue.)
3. Confirm cancelling all documents.

Keep in mind that once information has been sent to the printer it resides in the spooling folders within Windows. It may a while for printing to stop as this data clears the system.

If the printer continues to print (ie multiple copies of a cancelled job, or garbled print) remove the rest of the paper from the printer and allow it to run out. Once an "out of paper" type error appears on your screen, cancel the documents. Once all print job information has deleted, reload the paper and press the paper feed button once to clear the red light and return the printer to a ready state.

Jul 16, 2008 | Epson Printer

8 Answers

Very slow PDF and large files printing

Change to print as an image.
Go to print then click on advance and select image.

May 21, 2008 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Printing problem

This error message indicates that the printer memory is full. You might be sending too many documents to print at the same time. I would suggest dividing the number of documents/pages into smaller groups so the printer can take the load. Hope this helps!

Feb 22, 2006 | Xerox 6100/DN Laser Printer

Not finding what you are looking for?
OKI C5500n Printer Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Printers & Copiers Experts


Level 3 Expert

1113 Answers


Level 1 Expert

38 Answers

Dominion Computer...
Dominion Computer...

Level 2 Expert

269 Answers

Are you an OKI Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides