Question about Home Satellite Radios

1 Answer

Sat stuck on one spot

My new nuvi 310 refuse to move from one spot. i recently went to brisbane , Austarlia using the nuvi, once there i tried moving around BUT the system seems to be stuck on one spot, it refused to plot any other directions. Now i am back in Melbourne and i have tried to work it again but it is stuck in brisbane, still showing me that the vehicle is still in brisbane.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 77 Answers
Re: sat stuck on one spot

Can you still access the menus or has it locked up totally?

If it has locked up totally, there is usually a tiny recessed reset button that you can press to restart. failing that, try holding down the power button for 10 seconds

Then take it outside somewhere where there is plenty of clear blue sky and turn it back on again. It might take a while to get a good satellite lock, but it should come back.

Sat Nav systems do not work well indoors, which is where most people want to test them.

Posted on Jan 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have moved my Sirius Radio. In relocating the antenna wire I put a very small diameter staple through the antenna wire. I did not move the antenna receiver at all. Now when I have hooked the radio b

If you have pulled the staple back out then that is probably not the problem. You can use a multimeter to check for continuity thru the cable. My guess is that you have something hooked up wrong.

Sep 30, 2014 | Audiovox SIR-PNP3 SIRIUS Radio Receiver

2 Answers

Updating pansat2700a sat receiver

The problem is not clear, if the Pansat is stuck after updating, or you get no channels , then repeat the updating again.
Check all cables and antenna dish.

Sep 05, 2008 | Home Satellite Radios

1 Answer

Nuvi 660 thinks it is in Kansas

Kansas is a default location. It is not getting a sat signal as it asks about being indoors. New GPS or one turned off for a long period of time or moved a large distance while off will need to download a new constellation table before it will be able to function. This may take 20 minutes or so. Unless it is a defective unit, place it where it has a clear view of unobstructed sky. And leave it on a while. Once it learns what sats to expect, it should begin to work.

Jan 30, 2009 | Home Satellite Radios

1 Answer


FIXED! smashed it on the floor. best move i ever made.


read reviews before buying any sat radio, good luck.

Jan 21, 2009 | Delphi Roady XT XM Radio Receiver

1 Answer

Wireless FM modulator

first you have to set a channel in your sat radio then tune your car radio to that channel go to menu and then to set fm frequency in your sat radio and choose one try to get one that does not have a station on it whatever you set it at just tune your car radio to that frequency and it will work

Dec 05, 2008 | Delphi XM SKYFi2 1016211B1 Satellite Radio...

2 Answers

Gamin nuvi 200

need to get unlock code from garmin ! they will give it to u for free !

Jun 14, 2008 | Kenwood SIR-KEN1 SIRIUS Radio Receiver

2 Answers

Sirius Starmate Power

I have the same problem. It happens even more with a generic universal power cord instead of the Sirius brand one.

Apr 16, 2008 | Sirius Starmate ST2 Satellite Radio...

1 Answer

Garmin nuvi 200

Go to the gamin site and register. You will then need to download the driver for your model. After you register the web site should walk you through this. after you download the driver you may then update the software. One word of note, if you have the 2008 software than your up to date. Gamin updates there maps only once a year.

Mar 27, 2008 | Home Satellite Radios

2 Answers

Sirius radio repair

I have a streamer model siirus radio and I went to move it to another location and the power outlet either fell out or went inside the radio. Is it an easy fix that I can do myself or where is the nearest repair service? Thanks

Dec 09, 2007 | Home Satellite Radios

2 Answers

Viewsat ultra

This is not the site for what you are looking for, you need the fta site. You can go to dss****** and search for any FTA sites, regarding the view sat. If you have anyone programming for you, you will need to take back. If you are trying to DIY then look for a FTA site that will teach you how to JTag your equipment. If im correct you may have to go inside to repair. If it does not reset then Jtag is the best option. I think dsstester or the other sites can help if you look in their forums. Hope this helps!

Sep 21, 2007 | Home Satellite Radios

Not finding what you are looking for?
Home Satellite Radios Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Satellite Radios Experts


Level 2 Expert

473 Answers

xxxxxx xxx

Level 3 Expert

4679 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21840 Answers

Are you a Home Satellite Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides