Question about Kenmore Ovens
Tonight my wife and I tried cooking a pizza and at the end of the regular cooking time the pizza was burnt and now the oven stays on all the time. The only way to turn it off is to unplug the unit. When I try plugging it back in the oven comes on.
A good pre-heated pizza stone will help cook the crust better when the pizza is placed right on the stone. As for the cheese burning, check the actual temp. of the oven with a good thermometer.
Posted on Feb 17, 2008
SOURCE: self cleaning oven directions
Press the self-clean button. The panel becomes blank(---), then press the up arrow( ^ ). The panel will appear 3:00 (indication for the duration of self-cleaning). The oven will lock on its own and start the self-cleaning. Good luck, ya'll!
Posted on Dec 09, 2008
SOURCE: F3 error in roper model B9757XO
Hi. This F-3 code is representing a malfunction within the oven temperature sensor. It is open at the moment and unable to transfer data at this time.
You can test by Measuring the oven temperature sensor resistance, should be1100 ohms. If not, replace sensor.
Posted on May 16, 2009
During the cleaning cycle, there was a temp sensor malfunction that may have damaged the temp sensor. this is a common occurrence with this model. this is refereed to as a runaway temperature code. the sensor lost control of the cleaning cycle and it got to hot. the temp sensor is fried and it will need to be replaced.
Posted on May 22, 2009
Try resetting by turning off breaker for a couple minutes then turn back on. If this does not do it you will need to acess you door latch switch. This is acess by removing the top panel. Check for continuity with latch open you should have none and you should have continuity with latch closed. You can enter your model # at www.appliancehelponline.com to bring up illustrations and parts.
Posted on Mar 28, 2010
hi there! I have a moffat stove and hopefully these instructions help you.
First clear out the racks in your oven. Take them out and remove any excess chunks at the bottom.
Then close your oven door and lock it by pulling the lock latch.
Now looking at your oven knobs [not your burner knobs] turn both of them so they are both on the arrow knob [your oven knobs should have small pictures on them and both should have arrows]
Now you need to set the time so in the middle of your oven their should be a timer and one start and stop timer on top of each other. Both timers go in increments of half an hour. So if you are starting your self cleaner at 3 move the dial to 3 or if you are starting at 3:30 move the dial to one tick after 3. Once you set your start timer, you need to set your stop timer.
Setting your stop timer, it is recommended to set it for 3-5 hours. I set mine for 4 hours. So then set stop timer to time you want the cleaning to be. If you set your start timer at 3:30 put your stop timer at 7:30.
The oven will start cleaning according to the time you set. The oven will get very hot. I recommend to not used the burners as the temperature goes to 500 degrees! You will smell an odor and that is your oven cleaning.... Hope this helps...
Posted on Dec 29, 2010
Tips for a great answer:
Oct 15, 2013 | Kenmore 49043 Electric Single Oven
Sep 15, 2012 | Kenmore 40494 / 40495 / 40499 Electric...
Jul 24, 2010 | Kenmore 40494 / 40495 / 40499 Electric...
Apr 13, 2010 | Ovens
Dec 22, 2009 | Frigidaire 30" Self-Cleaning Freestanding...
Dec 31, 2008 | Kenmore 40494 / 40495 / 40499 Electric...
Dec 24, 2008 | Frigidaire 27 in. Electric Double...
Dec 16, 2008 | Kenmore 40494 / 40495 / 40499 Electric...
Sep 14, 2008 | Frigidaire 30" Self-Cleaning Freestanding...
Oct 24, 2006 | Kenmore 40494 / 40495 / 40499 Electric...
Oct 16, 2016 | Kenmore 40494 / 40495 / 40499 Electric...
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: