Question about One For All URC-3021 Remote Control
I DONT KNOW THE CODE FOR MY ONE FOR ALL REMOTE SO THAT I PROGRAM IT TO USE FOR MY MAGANOVOX TV
Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.
if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
(For replacement remotes visit www.sparky-uk.com)
Posted on Jan 13, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 25, 2015 | RCA Televison & Video
Dec 01, 2012 | Televison & Video
May 23, 2010 | One For All URC4220 Remote Control
Feb 21, 2010 | Televison & Video
Nov 12, 2008 | RCA RCR311B Remote Control
340 people viewed this question
Usually answered in minutes!