Question about Sanyo DS31590 31" TV

2 Answers

Sanyo DS31590 channel display

I don't have the original remote or manual. The channel display shows all the time. Is there anyway to remove it through the 'Menu' button directly on the television?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: Sanyo DS31590 channel display

I found the solution to this problem . If someone accidentally hits the recall button the display channel will show on the TV screen, To correct this problem hit the Info Button and the display channel will disapear. This works only if you have the standard cable box. I have another TV that uses a dual mode cable box, tried this procedure with analog RCA TV but it didn't work. Don't know if this procedure will work for all display problems, but it worked for me.

Posted on Sep 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 90 Answers
Re: Sanyo DS31590 channel display

I don't think so...Problem is that most "universal" remotes leave a few features off...Usually the most important ones like the finer parts of the menu..Might be worth the time to locate an original remote for your set...

Posted on Feb 24, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do i take the tv off video2 with out the remote control

The only way I can imagine is changing the channel on the TV. Unless of course there is a Input or video source button on the TV itself. All the pictures I saw of this TV though don't show one. Sorry I couldn't be of more help.

Jul 19, 2011 | Sanyo DS31590 31" TV

1 Answer

I have the original remote for my sanyo DS31590, but i dont have the code used to program it to the tv, how do i go about getting this?

Original tv remote doesn't require input of codes to make it work.The remote u have probally already bad and have a dead CPU chip.Try website like to buy the tv original remote again.

Jun 13, 2011 | Sanyo DS31590 31" TV

1 Answer

The batteries in my tv remote leaked and ruined my remote. The tv was currently on video mode and there is no button on the outside of the tv to switch it. I bought a universal remote to see if it would...

Try tv manual channel button up few times,might able getting out of the video mode.Or try website like to buy an exact original remote.

Feb 26, 2011 | Sanyo DS31590 31" TV

1 Answer

CH3 display won't go off! HELP!


I don't think you'll get rid of the on-screen ident until you get the original remote. The symbol you need to look for is a TV screen with a cross in it
[+] a bit like this. It is possible that another SANYO remote may do the job for you, but is best to have the remote which goes with the TV.

Hope this helps (:-)

Nov 09, 2009 | Sanyo DS31590 31" TV

1 Answer

How do I get into auxillary mode?


Aug 24, 2009 | Sanyo DS31590 31" TV

1 Answer

The channel stays lit in the upper right corner


Unfortunately, you almost always have to have the original remote control to get this display to go away. The "display" button is a specific code on that remote.

With Dish remotes, though, sometimes you can try different buttons and they will occasionally operate different functions. In TV mode, try the menu orother buttons to see if it makes a difference. My suggestion is to call a TV repair shop and see if they will allow you to borrow/buy an original remote for that TV.

Hope this helps you...

Jan 06, 2009 | Sanyo DS31590 31" TV

1 Answer

Video mode

you have to have the original remote to get to the menu option.
I had to buy one just for that reason too.

here or ebay

Feb 25, 2008 | Sanyo DS31590 31" TV

2 Answers

Sanyo DS32424 can't hook up PS2

Some of the inputs will be below channel 2. Just channel down below channel 2 and see if it finds them..

Feb 24, 2008 | Sanyo DS31590 31" TV

2 Answers

Can't get DVD/VCR on TV screen

Universal remotes are not universal....You may be able to find one button labeled as something else to actually change your input. Just have to try them all... Nothing replaces the original....

Jan 09, 2008 | Sanyo DS31590 31" TV

2 Answers

How do I change the input without the remote

If there is no nutton on the TV to do so then you have to have the remote for it. You can try a universal remote but, usually functions like that don't work. Here is a link to the remote you need.

Feb 22, 2007 | Sanyo DS31590 31" TV

Not finding what you are looking for?
Sanyo DS31590 31" TV Logo

585 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66685 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides