CAN YOU TELL ME THE CODE FOR tv PANASONIC IN GENERAL ?

Hello

No such thing as 3 blink code for that TV check it again much much more carefully ad see the link below for blink codes for panasonic keep in mind they are general and a plasma TV needing repair is no match for the average person 1 its unsafe, 2 if you tamper with one board you can easily blow another within 15 seconds of powering it up. see the codes below but at this point you could easily destroy the TV , in this case take it to a shop. https://www.brainchamber.com/wp-content/uploads/2016/03/2010-12-10_112651_untitled_-_1.jpg

the blink codes are attached below

dont no the code but if you call pana and tell them the code they should no what it is. not always usefull as they can give a general response but worth a try. then post the answer.

Is it a 3 digit code or a 4 digit code?

0632 0638 0629 0630 0632 0641 0607 0626 0586 0596

Hello the blinking lights is a code to tell you what part of your tv has a fault. The service manual will tell you what the blinking code refers to. You can google the model number with the words service manual and you should get some results on where to download it.

You can get get parts for this tv at www.interliquidparts.com

• AGA600 - Panasonic AGA600 Universal Remote
• AJ-RC5 - Panasonic remote control Operating Instrutions AJ-RC5
• AK-HRP931P - Panasonic Remote Operating Instruction
• 
  
• 
  

Code For Model RCR350
Code 1003 for Panasonic TV Code 1054 for Panasonic TV Code 1062 for Panasonic TV Code 1109 for Panasonic TV Code 1170 for Panasonic TV Code 1248 for Panasonic TV

1. Press tv on your Sky remote control.

2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

3. Press tv again

Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

Panasonic Code: 0051

4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.

Can you tell me the Full Model number for this TV Please

Hello, the codes for each item will be different, if you check your instruction manual you will find a panasonic dvd code and a different panasonic vcr code, but both will be differet to one another as there is no general code.
Many thanks
Mark
www.sparky-uk.com