Question about Datamax M-4208 Thermal Label Printer

1 Answer

Datamax I-4208 Thermal Printer.

I'm trying to install a wireless card on my datamax printer. I've powered the printer off. Inserted the wireless card. Then gone to menue and NIC Adapter and it states that the NIC is not installed. I've entered the IP address, submask, gateway, and change all the setting the install guide gives me to change however, the printer still does not see the NIC. I've powered it on and off and hit the reset on the NIC. Nothing works

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 52 Answers
Re: Datamax I-4208 Thermal Printer.

I have seen quite a few bad nic cards from Datamax, and that may be the problem.
If you can set the card from the printer, then it is seeing the card as it reads directly to the processor when inserted. But the card can still be bad if you cannot ping from the outside.

Posted on Feb 25, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer


To view or set the IP Address on a Datamax I-4208, use the Front Control Panel on the printer and follow these steps:
Press Menu, go to Communications, then NIC Adapter, then IP Address.

Jun 19, 2014 | Datamax I-4208 Thermal Label Printer

1 Answer

Zpl emulation with datamax i-4208

You can't, on this obsolete model. zpl is "Zebra Printer Language." This model of Datamax is dpl only ("Datamax Printer Language"). Most current models of Datamax printers are dpl and zpl compatible.
Able Label Systems Thermal Printers

Feb 01, 2013 | Datamax I-4208 Thermal Label Printer

1 Answer

Datamax I-Class I-4208 void

If the word "VOID" prints, turn the printer off, reboot your computer, turn the printer back on, and try printing again.

Oct 23, 2011 | Datamax I-4208 Thermal Label Printer

1 Answer

Datamax i -4208 printer

Any Thermal Transfer or Direct Thermal label on a 3" i.d. roll with maximum o.d. of 8" and label width between 1" - 4". Thermal transfer labels require appropriate ribbon.

Nov 24, 2009 | Datamax I-4208 Thermal Label Printer

1 Answer

I need driver for datamax m 4206 e mark II

Free Windows Printer drivers for Datamax can be downloaded here: Custom Design Label Systems from Able Label Systems
Look for the link toward the bottom labeled "Free Thermal Printer Drivers."

Jun 16, 2009 | Datamax M-4208 Thermal Label Printer

1 Answer

Datamax i - 4208

If you use ms-access you must have installed the windows driver, therefore you must enable the cutter in the printer properties. Position fault is that it does not detect the label, must be press the FEED key or to calibrate, press the FEED key for 5 seconds to calibrate the sensor label.

Sep 01, 2008 | Datamax M-4208 Thermal Label Printer

1 Answer

Datamax problem

You probably need to adjust the leveling cam if you have not done so already. This is the green thumbscrew near the print mechanism.

Dec 18, 2007 | Datamax M-4208 Thermal Label Printer

Not finding what you are looking for?
Datamax M-4208 Thermal Label Printer Logo

Related Topics:

635 people viewed this question

Ask a Question

Usually answered in minutes!

Top Datamax Printers & Copiers Experts


Level 2 Expert

67 Answers


Level 2 Expert

166 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Are you a Datamax Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides