Question about Audio Players & Recorders

1 Answer

Old jvc home stereo

I have set my jvc stereo to the am and fm programs i want. Unfortunately the am stations comes out loud and clear on the stations because it has a highlighted tuned - lit button.. but the fm stereo light does not light up when on fm and therefore the sound is not as loud or powerful as the am?? How do I set the fm light to come on " tuned" or "stereo" ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Audio Player... Master
  • 5,547 Answers

FM stereo will need a good aerial to work properly, but AM doesn't. If you have not got a good aerial, stereo will stay off. Though you might still here the station. It needs a lot of signal to make the stereo light activate. If was to come on in the weak state the sound would be full of interference. So the set keeps it switched off.

Posted on Oct 05, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 9 Answers

SOURCE: How to set a station with the remote control

1 Tune in the station you want to preset..(use >> >>

Posted on Aug 11, 2005

  • 1 Answer

SOURCE: no fm reception

We had trouble switching from AM to FM. We finally solved the problem by pushing the reset button on the back of the unit (any sharp pointed object can be used to engage the reset button). Do this followed by setting the mode to FM and try tuning in your FM stations. Try the procedure several times and it may finally kick in, as was the case with us getting our AM stations

Posted on Jan 01, 2008

  • 135 Answers

SOURCE: I dont have a manual for my philips shelf stereo and I cant tune

http://www.retrevo.com/support/Philips-FW930R-manual/id/446bh839/t/2/

its here

Posted on Jan 18, 2009

  • 11800 Answers

SOURCE: Denon UD-M30 Tuner problem I can

If the RDS data is displayed it mean that the discriminator circuit - the circuit that extracts the sound form an FM signal - is faulty. The circuit will have to be replaced, a job for someone with electronics experience: he must identify the exact model and version of the chip, replace it and adjust the phase shift if necessary.

Posted on Dec 20, 2010

  • 1 Answer

SOURCE: How do I preset individual radio station frequencies?

To set individual presets: 1. tune to the station you want as a preset 2. hold down the number (ie "1") on the remote until the number blinks on the system 3. repeat for all other stations
press the number on the remote to tune to your preset
this is very similar to setting the presets on my car radio

Posted on Feb 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i program the F.M. Stations on my stereo's


It really depends on your radio but most of them you just go to the radio station you want and hold the number you would like it to program to for about 10 seconds

Feb 19, 2012 | Audio Players & Recorders

1 Answer

I need a set of instructions for programming a JVC remote control, RM-SRX7010J so that I can select several FM radio stations using the remote control. My stereo receiver is JVC RX-7010V. Thanks in...


Hi Will,


If you want to store preset station so that you can easily select your favorite FM station, instructions on how to do this are listed on the JVC RX-7010 User Guide (page 20-22). Remote control operation is also listed there. It is to long to write here.

Please download and save the Pdf file format of the user guide HERE.

Enter your email add and the confirmation number and then click "Download Now" to automatically begin the download. It is a safe website, I used it personally.


Kind Regards,

Mjsazon

Nov 24, 2011 | JVC RM-SRX7010J Remote Control

1 Answer

How to save FM radio settings in JVC car stereo


Try this, tune to the desired radio station and holdpress the station number ( 1-6) for a while, it should blink twice to confirm its storage.
Ekamave

Jan 12, 2011 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

How do you program the cd to the GPX home stereo system


How do you program FM stations on the old model GPX s7794 model. I do not have a remote. Thank you!

Dec 19, 2010 | GPX HM3817DTBLK Shelf System

1 Answer

I dont know how to set the radio stations... please help..


press the number for 3 second
example, if you want a 104.7 in number 6, press # 6 for 3 second.

Apr 27, 2010 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

Auto muting on when on am/fm and no sounds come out. everything else is fine.


That's normal.

The Auto Muting mode mutes the audio output of the tuner if the station is not sufficciently strong to be accurately tuned. Otherwise you would hear all that interstation hash noise.

Press the FM Mode button to change it to Mono if you want to manually tune a hard-to-reach station. It will be in Mono.

Page 26:

AUTO MUTING
Normally select this.
When a program is broadcast in stereo, you will hear stereo sound; when in monaural, you will hear monaural sound.
This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

Mar 31, 2010 | JVC RX-D205 7.1 Channels Receiver

1 Answer

Connecting an MP3 player to car radio


The most common way is to use the auxiliary input of the deck or head unit. However I don't believe the JVC model you have has one of these. Don't despair though. Head to your local department store with a music department and pick up a universal FM modulator ($20-$30).

These will 'pretend' to be an FM radio station inside your vehicle. Attach the stereo mini plug to your walkman or other audio device (mp3 player etc.) Then tune the FM Radio to the fm station listed on the FM modulator and you will be able to listen to the device through your car stereo speakers. Now this isn't as clean as a direct hookup but for most its an economical way to listen to alternate sources on your Car Stereo.

Jul 07, 2009 | Sony Car Audio & Video

1 Answer

Degen DE1103 background tone


the background tone is due to frequency static...the design of the stereo is not good... it lack of noise destortion cirquit..and almost all stereo that is analog usually poor in in design..change the stereo.try stereo that is digital in design..

Oct 13, 2008 | Kaito KA1103 SW/FM/AM Radio

1 Answer

No fm reception


We had trouble switching from AM to FM. We finally solved the problem by pushing the reset button on the back of the unit (any sharp pointed object can be used to engage the reset button). Do this followed by setting the mode to FM and try tuning in your FM stations. Try the procedure several times and it may finally kick in, as was the case with us getting our AM stations

Dec 30, 2007 | GPX HM3817DT Shelf System

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

2,019 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5547 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...