Question about Barebone Systems
Hi mate what virtual dj have you downloaded ie red , blue , fx ?
Posted on Feb 20, 2008
The only ways to reset the tril period is to either restore the system to a time before you first installed Virtual DJ or re-install your operating system.
Both of which will remove the encrypted key in the registry.
Hope this helps.
Posted on Feb 19, 2008
Tips for a great answer:
Oct 04, 2012 | ASUS G74SX-DH72
If you can start your computer into safe mode
and you want to know what this is the error code is related to
click start control panel administrative tools computer management then select event viewer this may vary depending on what operating system you have
extend the events there you will see errors in red you will no what exactly what the error was and at what time it occured
or click start type in event viewer press ENTER
you might be able work your way through the problem
Test all power and data leads that attach to your hard drive IDE,SATA
the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have secure dust free connections and are not faulty or just replace them they could be faulty
motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail
make sure all leads that are attached to your drives dvd\cd floppy have secure dust free connections and are not faulty or just replace them they could be faulty a computer needs
power and data to travel through every working device and to continue its cycle and have an end so any faulty leads will end up with a computer error
even something as small as a faulty power lead or fan lead can cause you problems
computers need all of the data and electrical current to travel through every working device and to have an end to be able work properly
make sure ram modules and cmos batteries have dust free secure seatings and cmos battery has charge some motherboards cmos batteries are soldered in
you might not have enough computer ram
not having enough computer ram will run your computer over its limits putting to much strain on the CPU central processing unit and can cause memory dumps
you might have to many programs trying to or accessing the internet at the same time
scroll to bottom toolbar (bottom of screen) right click select task manager
applications you will see whats running
if you see anything you dont need running select end now and you might uninstall that specific
program if you or computer does not require it to run and
some unnecessary programs that could be jamming up your computer
also under processes see what is ticking over in the background again if you see something you
dont need to be and users you will see who is using your computer
Take out the RAM and take it to a computer store to see if there are any problems with it.
You can try replacing the RAM without having it checked, because RAM is relatively inexpensive.
But if you can find a computer dealer that has a RAM tester, you can usually get your RAM tested for free
To test RAM check here - let it run 4+ hours or so. <-- best method
you might need to add more computer ram
if you're not sure if a module is right for your system use the
Crucial Memory Advisor tool for a list of guaranteed compatible modules. first you will need to select the manufacturer from a drop down list then select your product line
from a drop down list then select the model then click find it will take you directly to compatible ram also you will have an option to scan your system
you should always ask for a guarantee on the compatibility of the ram before making any purchase
might be getting hot
check you CPU make sure its securely seated and has thermal grease
hope this helps
Sep 27, 2012 | Intel AOpen XC Cube EZ65 P4 Media PC...
bluescreen can be caused by a number of things
a bad driver loose or faulty lead or not having enough ram
click start control panel administration tools computer management device manager scroll through all of your devices
if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver
if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver
if you computer came with a motherboard disk the drivers could be on it
or you might have to download one
you might not have enough RAM random access memory not having enough will cause your computer to run over its maximum limits and can cause the blue screen of death and hang and cause memory dumps
make sure your ram modules have a dust free secure seating and the CPU central processing unit has thermal paste
if you dont want to install more ram uninstall some unnecessary programs
a bad or faulty motherboard lead or its connection if its a flat 40 pin ide it will be the first to fail
make sure all leads have a dust free secure connections
hope it helps
May 11, 2012 | Shuttle (SH55J2) Barebone
Apr 11, 2011 | Barebone Systems
Feb 22, 2011 | Barebone Systems
Feb 08, 2010 | ASUS Barebone Systems
May 15, 2008 | Barebone Systems
May 08, 2008 | Barebone Systems
May 06, 2008 | Quanta Computer (QTW3A945/90UL/KUS)...
Mar 17, 2008 | Barebone Systems
265 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: