Question about Navman F20 GPS Receiver

3 Answers

Navman f10 unit is stuck with 3way picture on screen, laptop left side unit with red cross on right side and 3 prong arrow in middle attaching back and forth to laptop picture. we cannot clear screen and get back to menu unit is actually F10 model

Posted by on

  • 2 more comments 
  • princess50 Jan 31, 2008

    unit is stuck with 3way picture on screen, laptop left side unit with red cross on right side and 3 prong arrow in middle attaching back and forth to laptop picture. we cannot clear screen and get back to menu. unit is fully charged up.

  • Anonymous Apr 17, 2008

    3 way picture of laptop usb and navman with a red cross. navman f10.

  • Anonymous Apr 24, 2008

    I have the same fault with my F10

  • Anonymous Jun 02, 2008

    I've got a F10 Navman. Was running alright whilst driving and suddenly it stopped and showing a blank screen with a picture of a computer running a line to a USB and it doesn't work anymore.



    Please advise. It is only 3mths old and we hardly ever use it.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Hold down on/off button till screen clears,this should reset navman F10 .Turn back on and it should be working normally.this worked on mine.

Posted on Jun 19, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How about you plug it into a computer?

Posted on Jun 18, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

By accident i chose the wrong language. how do i change it back to English

Posted on Sep 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the auto convergence button


Hello
From it menu option, suf through and come to automatic convergence display option and press Ok button on the remote control.

The List & Labels part of the setup lets you edit your channel list and choose or create a

personal six-character label for each channel.

Note: Changing List and Labels can be time consuming. You can change these at a later time by accessing the

Setup menu.

1. Press the left or right arrow to scroll through the available channels and choose the

channel you want to edit.

2. Press the down arrow to highlight the In channel list option. Press the left or right arrow

button to add (the box is checked) or remove (the box is unchecked) the channel from the

list.

3. Press the down arrow to highlight the Channel label option. Press the left or right arrow

button to scroll through the available list of 25 most common labels. The last option in

the list allows you to create your own six-character label for the channel (the first letter of

the label is highlighted).

4. Press the 1 or 2 number button to change the first letter of the label.

5. Press the right arrow to highlight the second letter, then press the 1 or 2 number button

to change the second letter, etc...

6. When you are finished creating your label, press OK. For model D34W20, your TV tunes to

the last channel available in your channel list. For models D40W20 and D52W20 only, the
Auto Convergence menu appears next.

Auto Convergence (for models D40W20 and D52W20 only)

Your TV's picture tubes might have been disturbed during delivery or after you moved the TV,

causing the color in your TV to be out of alignment. The colors adjust by starting auto

convergence.

1. Press OK to begin auto convergence.

2. When the auto convergence is complete, the Red center convergence menu appears. The

cross in the middle of the screen should be yellow. If it is not, use the arrow buttons to

move the red cross to overlap the green cross. Press OK when adjustments are complete.

3. The Blue center convergence menu appears with a cyan cross in the middle of the screen. If

it is not, use the arrow buttons to move the blue cross to overlap the green cross. Press OK
(the TV tunes to the last available channel in the channel list).
Ok

Mar 16, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

I need to install a 4 prong wiring plug on the this unit. However the old thre prong wiring it not color coded to show where to replace the new 4 prong wires.


Good Morning. Looking at the terminal board. Left to right. Left, black wire, middle, white wire, right, red wire. Green wire that's left, find an external screw that screws into the frame and attach wire here. Hope this helps and have a good day.

Feb 08, 2011 | Dryers

1 Answer

How do i hook up my dryer from a 3 prong to a 4 prong


UNPLUG DRYER FIRST.

Remove old cord from back of dryer. Make note of where white, back and red wire hook to on piece of paper.

New cord has 4 wires. looking at the back of dryer,

RED Wire, should have been tied to terminal screw on right side,

WHITE Wire, should have been tied to center terminal,

BLACK Wire, should have been tied to left terminal,

Remaining wire is GREEN, attach to body ground screw located next to cover plate, screw is generally painted green. IF not attach to unit body.

Oct 01, 2009 | GE DCVH515EFWW Electric Dryer

1 Answer

The plug hook up


if you are talking about a dryer, this is what to do

if you are changing a 3 prong to a 4 prong

as long as you have the white in the middle terminal the red and black can go on either sides.just make sure the white in the middle and the red is on the right or left. the green is ground so hook that up to a screw

if it is from 4 to 3, just make sure the middle of cord is in the middle

thanks

Sep 05, 2009 | Kenmore Dryers

1 Answer

I have a CRER5700ASO dryer that has a 3 prong plug that needs to be hooked into a 4 prong outlet. How do I connect the 4 prong plug to the dryer? Thanks


Red to Red(left or right side)
Black to Black(left or right side)
White to White(middle)
Green to either white or any ground screw around the terminal block area.

Sep 04, 2009 | Dryers

1 Answer

Changing the 3 prong dryer cord to 4 prong


White in the middle.
Green outside the cover to the ground screw.
Black and Red to either right and left.

Mar 23, 2009 | Maytag Dryers

1 Answer

Changing from 3 prong to 4 prong cord


The white wire goes in the middle between the 2 hot wires. 0c0b03b.jpg

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Mar 19, 2009 | Dryers

1 Answer

Navman F10 wont function shows sat nav connecting to computer on screen


Try holding down on/off button till screen clears,switch back on and it should be working normally,this worked on mine,it had picture of laptop ,navman usb cable and a red cross,hope this helps.Cheers.

Jun 10, 2008 | Navman F20 GPS Receiver

1 Answer

Dryer


red goes far left, black goes far right, grey goes in the middle, green attaches as an additional ground.

Mar 16, 2008 | Maytag Neptune MDE5500AY Electric Dryer

Not finding what you are looking for?
Navman F20 GPS Receiver Logo

Related Topics:

1,270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Navman GPS Experts

Marvin
Marvin

Level 3 Expert

82285 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Navman GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...