- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Setting Time 1 In the Clock priority mode, press and hold TITLE for at least 2 seconds while the time is displayed. The time indication will blink.
2 Turn the Rotary encoder to adjust the hours while the time indication is blinking.
3 When the hour has been adjusted, press the Rotary encoder.
4 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the Rotary encoder.
• To synchronize the clock to another clock/watch or radio time announcement, press and hold the Rotary encoder for at least 2 seconds after setting the “hour.” Minutes will reset to 00. If the display shows over “30” minutes when you do this, the time will advance one hour.
You can try the following steps
Setting the clock 1 Press and hold SEL (select) for more than 2 seconds. “DEMO,” “CLOCK H,” “CLOCK M,” “DIMMER,” or “AMP GAIN” appears on the display. 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. 2 Adjust the hour. 1 2 3 Set the minute. 1 Select “CLOCK M” (minute). 2 Adjust the minute. 1 2 4 Finish the setting. To check the current clock time or change the display mode Press DISP (display) repeatedly. Each time you press the button, the display changes as follows: • During tuner operation: • During CD operation: • During power off: The power turns on and the clock time is shown for 5 seconds, then the power turns off.
1 Use MULTI-CONTROL to select CLOCK SET. 2 Press MULTI-CONTROL to display the setting mode. # Press BACK to return to the previous display. 3 Press MULTI-CONTROL to select the segment of the clock display you wish to set. Each time you press MULTI-CONTROL, one segment of the clock display is selected. Hour—Minute As you select segments of the clock display, the selected segment blinks.4 Turn MULTI-CONTROL to put a clock right. # You can also perform the same operations by pushing MULTI-CONTROL up or down.
Changing the general settings (PSM) You can change the items listed on the next page by using the PSM (Preferred Setting Mode) control. • The PSM items are grouped into five categories—“Disp (display),” “Clock,” “Tuner,” “Color,” and “Audio.” Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 23.) The currently selected category is shown on the left side of the display. 2 Press 5 (up) or ∞ (down) repeatedly until your desired PSM category appears on the left side of the display. 3 Select the PSM item you want to adjust. 4 Adjust the PSM item selected. 5 Repeat steps 2 to 4 to adjust the other PSM items if necessary. 6 Finish the setting. To set clock—Clock Hr, Clock Min You can set the clock using the PSM control. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. 2 Press 5 or ∞ repeatedly until “Clock” is selected as the PSM category (it is shown on the left side of the display). 3 Press ¢ or 4 to select “Clock Hr (hour).” 4 Turn the control dial to adjust the hour. 5 Press ¢ or 4 to select “Clock Min (minute).” 6 Turn the control dial to adjust the minute.
to set the clock just press and hold the DISP for 5 to 10 seconds, button while the clock is is displayed. When the the time starts flashing, use the DISP button to adjust the time. When you have the correct time, just hold the button until the clock stops flashing and you're done.
Here is the link to the DEH-P3900 website page (sorry is the closest i could find, but changing the clock is the same);
You can download the manual from there - you have to register, but it's free.
if you want a quick way, pioneer says:
"SETTING THE CLOCK
How do I set the clock on my single CD player?
For most Pioneer single CD players, you can set the clock using the following steps:
Press and hold the SOURCE button until the unit turns off.
Press SOURCE and hold again until the clock appears in the display.
Press the left or right arrows to select the segment of the clock display you wish to set. (As you select the segments of the clock display the segment will blink.)
Press the up or down arrows to either increase or decrease the numbers in the blinking segment.
Once the clock is set correctly, press the SOURCE button to exit."
Hope this helps - please post again if not :)
If you hold the D button in for 3 seconds then a menu appears. Press the button until the clock setting comes up. Now you use the dial button to set the time. Turn one direction to set the minute and turn the dial in the other direction to set the hour. Hope this helps!