Question about Dell UltraSharp 1701FP 17" LCD Monitor

1 Answer

1701FP display problem

My company have 1 unit of 1701FP. The problem is the display of the monitor is like the colour is too reflected to my sreen. So the screen like something 'burnt' not comfortable to my eyes when looking to the monitor for a long hour. I tried to tuning the contras and brightness but still no different.Even in low tune of contras and brightness, the 'burnt' image still happen. Anybody can tell me what the problem of it and the way to repair it. TQ.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 138 Answers
Re: 1701FP display problem

Try to do the factory reset. It is on the pop up main menu on the screen by pressing the screen button.
Thank you,

Posted on Mar 18, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have an old Kogi L9CH 19" Flat Panel LCD Monitor that pretty-much continually displays the on-sreen monitor menu for settings. I would like to take it apart to see what it could be but not sure how to...

It seems that you may have a faulty switch, I have included a video that covers Video Monitor Repair and generally is the same for most models. Things to keep in mind when repairing units is that components inside can have high voltage, sharp edges and corrosive content.

Each model is a little different yet the component placement and purpose is pretty universal for brands and display units. Please take care when opeining and diagnosing the issues with your unit.


Mar 06, 2015 | Kogi Computer Monitors

2 Answers

I have lost the original power supply for my dell 1701fp monitor. I have a power supply that I think may work as a substitute until I can replace the original. I need to know, what the acceptable voltage...

What ever you use, it must be REGULATED power supply that will maintain 14vdc output, rating at 3A. These regulated power supply can easily maintain the output voltage within +/- 5% with input AC voltage range from 100~240vac.
Linear regulator power supply may not work since it has slow response time to regulate the voltage.

Basic LCD monitor and TV troubleshooting guide:
Failed TV and Monitors:
Learn about bad caps:
Capacitors kit: he can make you a set of caps.
Or, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Jan 06, 2011 | Dell UltraSharp 1701FP 17" LCD Monitor

2 Answers

My LCD monitor is blinking green but no display is coming, some days back after blinking 15-20 minute display comes. But now display not come

Most common failure in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, falied inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what goes wrong:
Post back what you see inside so we can guide you further.

Mar 09, 2010 | Dell UltraSharp 1701FP 17" LCD Monitor

1 Answer

We have the same problem as snoozi reported on may 31, 2009. I see no answers or resolutions posted. Is this monitor toast?

Sorry - found it!
Best I can suggest is trying another monitor. I'm pretty sure the display will be fine from the other monitor. If you have monitor drivers, you can try uninstalling and reinstalling them - however, I suspect your monitor is probably just an expensive paperweight now.

Dec 21, 2009 | Dell UltraSharp 1701FP 17" Flat Panel LCD...

1 Answer

There is a different coloured band down the side of the sreen

This likely to be one of 2 things. 1: its a fault with your screen, try it on another computer if the stripe goes away its 2: the display card in your computer. if its 1: you will need a new screen. if its 2: you will need a new display/graphics card. neither of these items are normally fixable.

Jul 13, 2009 | Gateway FPD1760 17" LCD Monitor

1 Answer

MOnitor Display

1. cheak the display cable.

2. Solder the dry points on the neck board.

Dec 19, 2008 | Computer Monitors

2 Answers

Monitor trouble shooting

what would i do for my monitor that went blank

Apr 07, 2008 | Dell E173FPb 17" TFT LCD Monitor

1 Answer

Crt screen power not appear

1)check the power supply
2)write in a desktop<properties<settings
3)setting<control pannel<display,appearance

Oct 13, 2007 | LG Studioworks 563N 15" CRT Monitor

2 Answers

GForce 6600 vs 7600 GS on Acer al1916w

Try to change the monitor . The monitor with GS 6600 plug it out. Then unplug the monitor attached at the GS 7600 and plug it into gs 6600 and see the result.
If it is ok now. Then it you must to troubleshoot with the GS7600
display card.

Oct 08, 2007 | Acer AL1916W 19" LCD Monitor

2 Answers

Monitor (Dell 1701FP) flickers, flashes and goes black

Just to check - when the screen is black- can you see any image- in its un-illuminated state. To do this look sideways along the screen not straight at it. I suspect this is an inverter problem. Whether or not this is repairable I know not- depending on your local repair facilities Perhaps DELL can suggest a local agent.

May 16, 2007 | Dell UltraSharp 1701FP 17" Flat Panel LCD...

Not finding what you are looking for?
Computer Monitors Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18258 Answers

William Miller
William Miller

Level 3 Expert

8795 Answers

Are you a Dell Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides