Question about Mitsubishi VS-80803 TV

1 Answer

How to set up hd on this tv

I have a 1998 vs80803 rear projection hd 1080 tv with bnc how to I get hd chanels with this tv

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Hi Brien,

You can hook-up your HDTV via the BNC inputs with the right equipment below.
Here is the link to a website that sells video transcoders for projectors and projection televisions. In addition, the link will take you to one particular transcoder that will work for your application.
http://www.curtpalme.com/RTC2200.shtm If you use this transcoder you will have to find a VGA to 5-BNC breakout cable to connect the output of the transcoder to your TV HDTV RGBHV inputs. The extra VGA input on this transcoder will not be used for your application. They sell another product that comes with the cable you need, but I did not see it listed separately. That product is their HDFury Basic Kit at the link below.
http://www.curtpalme.com/HDFury.shtm
Regards,
MyTvGuy

Posted on Jan 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the hd 1080 to work.


you need to check your inputs, HDMI or DVI not all inputs can except 1080i

Aug 04, 2009 | Mitsubishi WS-65513 65" Rear Projection...

1 Answer

How do I get 1080 with my tv?


You will need to connect an 1080p hd device to a 1080p tv via an HDMI cable.

May 24, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

BLUE RAY 1080 (p) PLAYERS INHANCE VISUAL HD ON 1080 (i) tV


try to see if u have hdmi slots and check the highest resolution it can go.there is a higher resolution called hdcp,with not div x but dvi-d where resolution can go up to 20000

Feb 06, 2009 | Mitsubishi WS-65513 65" Rear Projection...

1 Answer

My xbox360 Wont work on my WS-55513 MITSUBISHI COMPONENT


Try changing the settings on the Xbox under display to 1080i. If it is 1080 p, or 720p, the image will look funny so make sure it is at 1080i.

Your welcome

Your friend from down the lane!

May 21, 2008 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

No sound in hd 1080 mode.


check to make sure that you have all the cables plugged in for that model you need a total of 5 cables for the HD input. 3 component(red,green,blue) and 2 audio(red,white)

Mar 18, 2008 | Mitsubishi WT-46807 46" Rear Projection...

2 Answers

1080 VS 480


Trash can it and buy a new T.V.

Jan 06, 2008 | Mitsubishi VS-50111 50" Rear Projection...

1 Answer

HD setup, 480 to 1080 not working.


I had this same problem, got my HD installed yesterday w/ Direct TV, have had this TV since '02. The fact that is wasn't working, and Google, led me to your post in search of answers. I even went to a local retailer that sells the Mitsubishi TV's and they were as helpful as if I had gone to a drug store seeking the answer. So, between browsing other posts, and then going to the manual (who'd of thunk) I got my, and your, answer. You need to do the following, nothing magic: 1)Connect the component video output of the Direct TV HD Receiver to the DTV inputs on your TV. The COMP 1/2 inputs are NOT 1080 compatible, only the DTV input. As another poster said, you must use component video cables, not the old red/yellow/white cables. you can lose too much signal quality w/ the old R/Y/W cables and your TV still won't recognize the 1080. 2)Set your receiver to a HD Channel, which are in the 70's. 3)Use the format selection on your remote and select until you get the 1080i Standard (or whatever your preference is) format. 4)Enjoy Bottom line is the COMP inputs are not HD. Page 64 of the manual (at least the one i downloaded from mitsubishi-tv.com) is what gave me the final piece of the picture. Good Luck!

Sep 20, 2007 | Mitsubishi WS-65869 65" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-80803 TV Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1216 Answers

The Knight
The Knight

Level 3 Expert

75311 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...