Question about Garmin Nuvi 360 Bilingual GPS Navigator and Personal Travel Assistant GPS Receiver

2 Answers

Can't get a satelite signal

I bought a Nuvi 360 online and it will not pull any signal. I tried the reset and turning it on outside and let it search for an hour. Nothing seems to work

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Can't get a satelite signal

I had the same problem, I returned the 360 to garmin and they sent a new unit. Very quickly, with in 7 business days.

Posted on Mar 05, 2008

Re: Can't get a satelite signal

I am having the same problem. I think that Gramin is not tellimg us something. My signal will come a go, but never stay up for more them one minutes at a time.

Posted on Feb 14, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Garmin wrong location

Sounds like it needs to be reset and download a new 'catalog' and time set. That will then allow it to figure out where it really is. Check your manual for doing a hard reset. Might involve pulling the battey or holding the power switch on that model. Do this someplace where it can see the sky ie preferably outside and then reset and let it download and rest itself. It can take up to about 45 minutes for it to finish but after that you should be back to knowing where you are.

Mar 23, 2010 | Garmin nuvi 1300 Car GPS Receiver

1 Answer

Just bought a garmin nuvi 1300 and cannot type in the

reset it by turning off and hold finger on bottom right corner of screen, turn on, and wait then release finger, let unit go through set up screen and when down selrct correct country/state that you are searching for, you dont need gps signal as it will default to similation mode to search but it is recommended at set up phase

Dec 26, 2009 | Garmin nuvi 1300 Car GPS Receiver

1 Answer

Garmin Nuvi often cannot find satellites. Problem is intermittent but frequent.

It could be that the memory already have too much satelites selected. There should be a reset button somewhere (i'm not shure where though...) This master reset will clear the satelites in the memory and when turned on the first time it will start searching for new satilites since its memory is blank.
This might solve the problem...

Jul 09, 2009 | Garmin GPS Devices

1 Answer

Tom tom can't find sats signal

Try standing still outside in an open area. If you still don't get a signal it's probably broken but worth trying a reset - reset button generally underneath the unit needs a paperclip to operate it...

Jun 01, 2009 | Tomtom ONE 3rd Edition GPS

1 Answer

Nuvi 350 finds satellites but won't lock on

Please read this solution, which might help you. On the Nuvi 350, press and hold the lower left corner while turning on.

- Jim

Nov 22, 2008 | Garmin Nuvi 350 Car GPS Receiver

1 Answer

Garmin Nuvi 200W

If you push for 5-8 seconds on satelit indicator and then release it, the satelit meni is showen.

Apr 29, 2008 | Garmin nuvi 200W GPS Receiver

2 Answers

Garmin 360

have you ever updated the firmware (webupdater @

Dec 12, 2007 | Garmin nuvi 350 GPS Receiver

Not finding what you are looking for?
GPS Devices Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Devices Experts

Tom Chichester

Level 3 Expert

22562 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Bill Gilhooly
Bill Gilhooly

Level 2 Expert

94 Answers

Are you a Garmin GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides