Question about Dryers

1 Answer

Whirlpool Gold Ultra Care 2 Dryer

Not really sure what to do. No problem at all with the dryer then it just stopped running. Not sure if it's the thermal fuse, belt, or motor.
The light goes on when I open the door, close it, I hit start and nothing...No humming from the motor or anything...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 126 Answers
Re: Whirlpool Gold Ultra Care 2 Dryer - Dryers

Check main breakers or fuses

Posted on Jan 12, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to replace heating element on a whirlpool gold ultimate care 2 dryer

Go to and enter model. You will be presented with a list of common repair parts and may be able to view a video showing disassembly.

Jul 25, 2016 | Whirlpool Dryers

1 Answer

I have a Whirlpool Gold Ultimate Care II dryer. The dryer stopped working. It is getting electricity but still won't start. Any idea what the problem could be??

The first thing you need to check is if you actually have 240 Volts going into the dryer. Sometimes one half of the (dual) circuit breaker opens and only sends 120 Volts down the line. If you hear a buzzing sound when you press "start" but nothing happens, it could be a stuck motor. Or the motor could be running but the belt is broke. There are more possible scenarios, but try this first.

Jun 08, 2011 | Whirlpool Dryers

1 Answer

My Whirlpool GOld Ultimate Care II electric dryer is not drying well any longer. It is 5 years old and a load must be run 2-3 times to get it to dry. Please help.

it could be your heating element but if you use dryer sheets take your lint trap out and see how well water will run thru it it may need to be washed in hot soapy water hope this helps

Dec 13, 2009 | LG DLG2524 Gas Dryer

1 Answer

I have a Whirlpool gold Ultimate Care II gas dryer and 2/3 times the ignitor glows and lights the gas, 1/3 times it won't. When the gas does light, it doesn't seem like it's getting hot enough to do...

I would suggest the coils on the gas valve . Also check the vent to make sure good air flow is getting out of the dryer . Try disconnecting the vent hose and drying a load to determine if maybe the vent is the problem .

Jul 14, 2009 | Whirlpool LGB6300 Gas Dryer

1 Answer

Whirlpool gold utra care II gas dryer does not dry

That has to be a stopped up vent or a lint filled dryer. You gotta clean out the lint, open the vent.

Dec 27, 2008 | Dryers

1 Answer

Whirlpool ultra care 2 dryer. Stopped heating yesteraday. It spins but does not heat up. Please help.

the heater box fuse has failed,most likely from a clogged vent on the back of dryer or wall,you can remove the large back panel to get to the fuse it is on the top of the heater box on the side,it is a small fuse,you can get one at sears .com click on parts put your model number in(inside dryer door)and get your part,let me know how you do-mike

Nov 12, 2008 | Dryers

1 Answer

I have whirlpool gold ultimate care 2 the dryer is heating but not getting real hot

You may be having a venting issue, disconnect the vent from the back of the dryer,if it drys normally then you have a clog in the vent line too the outside, if still takes too long too dry you may have a bad operating thermostat on the blower housing.

Jul 16, 2008 | Whirlpool Dryers

1 Answer

Whirlpool ultimate care II gold electric dryer

the top and the front has to come off

Feb 04, 2008 | LG DLG2524 Gas Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides