CANNON SUPER 63 IMAGE RUNNER 1370F PAPER JAM

The Canon Image Runner 2520 uses a DC Controller PCB assembly that includes the display card as part of the assembly. The part number for the DC Controller PCB assembly is FM4-2924-000. You should be able to find this part in the Canon Image Runner 2520 service manual or by contacting Canon customer support for assistance in ordering the part.

http://pdfstream.manualsonline.com/3/32b4a0cb-1c5a-4b8e-b73e-fab3efed3fb3.pdf

Link to operation manual of your copier. Go to section 6 and look for
Removing Jammed Paper from Inside the Main Unit and you will see instructions to remove the drum.

delivery sensor problem

Hello,
where do You getting the paper jam?

This model is known for the poor pressure between lower door and paper vertical roller.

Please send more info.

You can also contact me over [email protected] for service manual.

clean all the rollers with a little soap and water then dry them. good luck

Is there paper stuck in the fuser? Sometimes you will have to remove the fuser usit and break it apart to clear the jam. Depending on your skill level this is better left to a technician.

12 x 18 is the largest size paper that can be used on this copier. If anything larger is used the machine will jam. The copier uses a series of paper sensors to track and time the paper throughout the printing process. The max is 18 inches anything over that cuase the machine to jam.

We finally found all the buttons-levers to push and to pull and were able to remove the paper that caused the paper jam. Thanks for your help Nellie

look on the control panel if there is a diagram of your printer it will usually light up the area where the paper jam is located.


once you find location of paper jam there is normally a green knob in the area of jam that when you manually rotate it will release paper also open paper drawer check for jam or unplug and plug copier back in somtimes this will force paper out as it resets

http://www.fixya.com/support/p189647-canon_imagerunner_5000_copier/manual-18713 here ya go, please give me good rating as far as being able to help you. Take care. :-)