Question about Televison & Video

3 Answers

Lost directions for universal remote control

I own a nexxtech 1519003B 4 in 1 universal remote control and need to program it for star/bell expressvu satellite and for my sanyo tv

I have been using it for a year now without problem until the battery died and I cannot find directions to reprogram

Posted by on

  • 6 more comments 
  • D1234 Jan 25, 2008

    i cant believe this I have the same problem after the batteries died and I have problem programming it again.

    list of my electronics:

    nexxtech 4-1 universal remote control 1519003B

    Sanyo old type

    please help if you know how to.

  • Bobby444 Feb 07, 2008

    I have a 4 in 1 Universal Remote by nexxtech 1519003b and I am presently using it for my tv. I would like to use it for my Scientific Atlanta Explorer 2200. Is it possible and if so what are the steps to configure it. I have lost the instrcutions and the list of codes.



    Thanks and regards



    Bobby

  • tonybell5967 Feb 15, 2008

    need all codes

  • Anonymous Mar 20, 2008

    I need the codes for philips.

  • Anonymous Mar 24, 2008

    need the tv ccodes for my nexxtech 2 in 1 universal remote control . Large buttons . model number # 15190008

  • appleofhisi May 27, 2008

    I have sanyo universal remote but I lost the direction to key yhe number in for the TV.

  • Anonymous Jul 23, 2008

    I Lost The Directions So I Can't Hook It Up To The TV

  • Anonymous Feb 22, 2009

    need codes for alba tv

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Sent to me by nextech....
Save Code list for future reference. Refer to the setup procedure below and look up the 4 digit code for your brand of TV, VCR, etc., from the list below.
Save Code list for future reference. Refer to the setup procedure below and look up the 4 digit code for your brand of TV, VCR, etc., from the list below.
1519001B, 1519002B, 1519003B, 1519006, 1519007 CL
Refer to the Owner’s Manual for your remote for more information.
Direct Code Entry
1.
Press and hold the
SETUP button until the
red indicator stays on,
then release the SETUP
button.
2.
Press and release
the desired Mode button
(TV, VCR, etc.). The red
indicator blinks, then stays
lit.
3. Enter the 4 digit code from
the code tables. Note: after
a valid code entry, the red
indicator turns off. For
an invalid code, the red
indicator flashes.
4. With your device on,
press CHANNEL UP. If
the device responds, no
further programming is
required. Note: If some
buttons do not operate
your device, try one of
the other codes for your
brand.
Note, when all codes have
been searched the red
indicator flashes rapidly for
3 seconds.
Code Search
If after trying “Direct Code
Entry” your device does not
respond, or if your brand is
not listed, try doing a search
of the code library for your
code by following the steps
to the right.
1. Manually turn on the
device (TV, VCR, etc.) to
be controlled.
2. Press and hold the
SETUP button until the
red indicator stays on,
then release the SETUP
button.
3. Press and release the
desired Mode button
(TV, VCR, etc.). The red
indicator blinks once, then
stays on.
4. Press the CHANNEL UP
button repeatedly (up to
300 times) until the device
to be controlled changes
channel. The red indicator
blinks, then stays lit.
5. Press and release MUTE
to install the code. The
indicator light goes off.
Most users will want to
store VCR codes under the
VCR button, Cable codes
under CBL, etc. If you want
to store a VCR code under
CBL, etc., first follow the
procedure for Direct Code
Entry and press CBL in step
2 of Direct Code Entry, then
enter ANY VCR code in
step 3 of Direct Code Entry.
Then follow the steps above
for Code Search.


Refer to the Owner’s Manual for your remote for more information.
Direct Code Entry
1.
Press and hold the
SETUP button until the
red indicator stays on,
then release the SETUP
button.
2.
Press and release
the desired Mode button
(TV, VCR, etc.). The red
indicator blinks, then stays
lit.
3. Enter the 4 digit code from
the code tables. Note: after
a valid code entry, the red
indicator turns off. For
an invalid code, the red
indicator flashes.
4. With your device on,
press CHANNEL UP. If
the device responds, no
further programming is
required. Note: If some
buttons do not operate
your device, try one of
the other codes for your
brand.
Note, when all codes have
been searched the red
indicator flashes rapidly for
3 seconds.
Code Search
If after trying “Direct Code
Entry” your device does not
respond, or if your brand is
not listed, try doing a search
of the code library for your
code by following the steps
to the right.
1. Manually turn on the
device (TV, VCR, etc.) to
be controlled.
2. Press and hold the
SETUP button until the
red indicator stays on,
then release the SETUP
button.
3. Press and release the
desired Mode button
(TV, VCR, etc.). The red
indicator blinks once, then
stays on.
4. Press the CHANNEL UP
button repeatedly (up to
300 times) until the device
to be controlled changes
channel. The red indicator
blinks, then stays lit.
5. Press and release MUTE
to install the code. The
indicator light goes off.
Most users will want to
store VCR codes under the
VCR button, Cable codes
under CBL, etc. If you want
to store a VCR code under
CBL, etc., first follow the
procedure for Direct Code
Entry and press CBL in step
2 of Direct Code Entry, then
enter ANY VCR code in
step 3 of Direct Code Entry.
Then follow the steps above
for Code Search.

answer found at support@orbyxelectronics.com

Posted on Jan 15, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Found the codes after an aggravating search, lost the instructions myself but finally found a copy:
Express view sat. codes: 0654, 0647, 0655, 0628
Star choice sat. codes: 0640, 0645, 0627
Sanyo TV codes: 0049, 0097, 0110, 0004, 0268, 0012, 0108, 0180

Nexxtech should post these - you get what you pay for I guess.

Posted on Feb 08, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Thanks for the star choice code, this is the second time ive had to try and re-program this remote in the past month, guess i should have held on to that code book.

Posted on Mar 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need program instructions and codes for neXXtech 4-in-1 universal remote control Cat #1519002.


Visit this site for more details. Type in the site name "Electro-help" either to Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as electronics equipments' repair help.

May 22, 2012 | Televison & Video

1 Answer

Bought a dish identical remote to Bell Expressvu.


You may need to program to your equipment, go to dishnetwork.com/tech and that will show you how to address your remote.

Nov 06, 2009 | DISH Network IR Remote Control

4 Answers

Codes to program Innovage Products Jumbo Universtal Remote


Innovage Jumbo remote codes for RCA TV; 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191,194.
Pansonic DVD; 175.
Pansonic VCR; 021, 060, 115, 125, 138, 148, 149.
Philips DVD; 173, 183, 198.
Bell ExpressVu; 168, 187, 194.

Dec 18, 2008 | Televison & Video

1 Answer

Need universal remote control codes


Well I have a nexx tech universal remote control model 1519001B but I lost the code list and I nedd the code for a JVC tv.

Mar 19, 2008 | Televison & Video

2 Answers

We have a nexxtech 1519003b


http://www.nexxtech.ca/content/support.aspx?language=en-CA

Follow the posted link to the support page for all nexxtech devices. Note: This link is to the canadian site.

Click the link for manual search then type your info in, i found my Nexxtech 4 in 1 MN: 15190003B here.

CoachH2O

Feb 16, 2008 | GPS

1 Answer

Remote code


i need the codes to program to a svlania

Feb 02, 2008 | Philips Magnavox Learning Universal Remote

1 Answer

Codes to program Innovage Products Jumbo Universtal Remote


I need the code for my rca tv so I can program the inovage jumbo universal remote Pleaseeeeeeeeeeeeeeee

Dec 31, 2007 | Televison & Video

7 Answers

Programming my nexxtech 3-in-1 remote control


looking for instructions for  remote control nexxtech 3 in 1 universal

Oct 28, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

4,392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75843 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82149 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...