Question about Cyberhome CH-DVD 300 DVD Player
You might want to reset to factory defaults, but there is an error in the manual. In order to reset to factory defaults, turn on (with no disc inside), DO NOT OPEN THE DISC TRAY, just press the stop button on the player for 5 seconds (some solutions say 20 seconds).
Posted on Oct 27, 2008
Try to reset it to factory settings.
Posted on Feb 09, 2008
I just had the same problem and I looked in the back of my Memorex dvd player and there was actually a button where you can turn the progressive scan on or off.
Posted on Jan 05, 2007
SOURCE: pscan message and split screen
well on your memorix dvd player you will get a orange triangle that says pscan (progressive scan) you will go to the back of you dvd/vcr and on the right hand side you will see a switch to turn on and off the pscan you will switch it off and you will be set to go
Posted on Aug 24, 2009
Tips for a great answer:
Aug 23, 2009 | Memorex MVD2022 DVD Player
Jul 11, 2009 | DVD & Blu-Ray Players
Jan 05, 2009 | Coby DVD-224 DVD Player
Jun 07, 2008 | Memorex MVD2022 DVD Player
1,328 people viewed this question
Usually answered in minutes!