Question about LG TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher

4 Answers

How to select "SPIN ONLY" cycle?

I have an LG TROMM front loader, Model No. WM0642HW. There has to be a way to make the machine spin without first rinsing.

I just can't figure it out, nor can I find it in any of the manuals or support pages. In the manual, it says that if you are going to store the machine in freezing temperatures, set it to spin-only for a minute to get all remaining water out. But it doesn't tell you how to do that!!

I'm not storing my machine, just want to be able to re-spin a blanket! Anyone know how to do this? Thanks!

Posted by on

  • cmwatson4
    cmwatson4 Oct 06, 2012

    That also worked with my kenmore. thank you so much!

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I TOO HAVE BEEN WONDERING HOW TO SPIN ONLY, AND I HAVE THE ANSWER :),, TURN THE POWER BUTTON ON, PUSH THE SPIN SPEED BUTTON NEXT TO DESIRED LEVEL, THEN PRESS START, THERE YOU GO , IT WILL ONLY SPIN, NOT RINSE AND SPIN :), BY THE WAY , I GOT THIS INFO FROM THE ONLINE MANUAL :), SHOULD WORK....

Posted on Feb 10, 2008

  • 1 more comment 
  • eureka321 Apr 02, 2011

    Simply:
    1) Press "on" button
    2) Press "Spin Speed" button
    3) Press START

  • kady98 Aug 01, 2011

    Thanks! I am so glad you helped me figure this out!

  • kady98 Aug 01, 2011

    Thanks! I am so glad you helped me figure this out!

×

I have the same question.........

Posted on Feb 08, 2008

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Amazing tried it and it works fabulous thks

Posted on Feb 23, 2016

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This works. Select power then hit spin button and select the spin speed then start the machine and it takes about 15 minutes normally. Don't select any other options.

Posted on Aug 16, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG tromm spins on washer,but doesn't on rinse and won't drain


ur confusing me its not suppose to spin first , first it rinses, then drains then spins

Jul 12, 2014 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

My LG Tromm front loader has an OE error message and isn't spinning. First received the message during a full load of laundry. Had to drain the water from the hose at the bottom and finally got it unlocked...


OE is normally down to blocked drain pipes, mcalpine (connection under the sink) or a blocked front filter. empty the machine and unscrew the filter behind the flap at the bottom right hand side, check for any obstructions, icoins, hair grips etc are normally blocking here

Apr 10, 2014 | LG WM-2277HW Front Load Washer

1 Answer

LG WM0642HW


make sure it drains the water out..it will not go through spin if there still water inside the tub... also drain is timed. Is there any error message? thx

Mar 01, 2014 | Washing Machines

1 Answer

I have an LG Tromm washer. I start it up it start


Hi,


LE code stands for locked motor error. When this error code appears in your front load washer it indicates a fault in the motor unit.

1 . Check the connections to the Coil/Stator at the rear of the unit possibly it should be something like a broken wire.

2 . Coil/Stator Assembly will be defective preventing the drive to operate.You should go for a replacement of that assembly.


Thank you !!

Jul 25, 2010 | LG WM0642H Front Load

1 Answer

I have an lg wm1814cw front loader with a ue code


Probably the pump filter is blocked.Make sure the machine is empty...Access filter via small door at floor level. Unscrew the filter cap, and clean filter. check that there isn't a coin stopping the impeller vanes. ...When you take the cap off, any water left in machine will flow out!! Leaning the machine back can help.....Good luck...Nomess

May 16, 2010 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

On my frontload LG tromm I have the error code EO it will


There is a filter on the bottom left of the machine. If you pop the door off you can drain it with the hose, then spin the black filter out of the housing. This may help. Keep a wet/dry vac handy.

Nov 28, 2009 | LG WM1814CW Front Load Washer

1 Answer

I have 2 problems that are associated. I have an LG Tromm 4.0 washing machine that will not spin after the rinse cycle. The machine sits there after rinsing and does nothing. After many minutes a sign...


I am not a repair professional. I am just a 78 year old
man who has been making his own repairs for about
50 years. Therefore the washer ID doesn't mean
much to me. It's been about 55 years since I had
experience with front load washers. However I can
suggest you go to www.applianceaid.com where
they have very good trouble shooting and repair
information on front loaders. I think you'll find what
you need there. You can search for the meaning of
the error code on the site.Don't worry about the
timer, they hardly ever go bad.Good luck with it.
If I have helped you, please rate my advice on fixya.

Nov 27, 2009 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

2 Answers

Error Message and Tub not spinning


UE is likely an unbalanced load or load is too large. Reduce the size of the load and your issue should be resolved.

Jul 21, 2009 | LG WM-2277HW Front Load Washer

1 Answer

Tromm Washer Model # WM2277HW by LG


will it spin after it washes if it does not then your belt might be broke

Feb 12, 2008 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

10,216 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...