Question about Washing Machines

1 Answer

Kenmore Washer 464625 error codes

I have a Kenmore HE2 model 110.46462500 Front load washer. The washer is flashing the LEDs on the selection dial. The Rinse, Spin and the Clothes Clean LED are on steady. The owner's manual describes this as an "Electrical Problem" It can be reset by canceling the cycle but it reappears when the cycle is restarted.

Any specific error with this combination of LEDs?

Thanks

Posted by on

  • HectorM Jan 12, 2008

    The LEDs light up about 10-15 seconds after starting. The door locks, then a brief pause, then they light up.

    I found the tech sheet behind the bottom panel. The codes show a serial comm problem with the MCU.

    I also found pin-holes in the drain hose where it rubs against the outer panel, right above the MCU. I am now looking for a replacement hose.



×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

Do they appear right when you start the washer or does it take a few minutes

Posted on Jan 11, 2008

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore HE 2plus front load washer and during any wash cycle the drum won't spin and at end of cycle displays F01


Front-loading washer Kenmore HE2 plus - spinning not ...

www.shopyourway.com > Manage My Life > Questions
My Kenmore HE2 plus washer has problems with spin funciton. almost all of the ... or twins size blanket, it just won't spin, even with extra spin cycle only. ... Check to see if the washer will spin without any clothes at all in the basket. ... My HE2 will wash a very small load. ... Any bigger loads The drum will try and turn but wont.

Front Load Washer Won't Drain or Spin Video: Washing ...

? 1:54
https://www.youtube.com/watch?v=wlMoT9rgvAg
Jun 1, 2012 - Uploaded by searspartsdirect
... won't drain or spin. For more front load washing machineinformation and repai. ... If the cycle has completed and water is still left in the machine select "Drain and Spin" to remove anywater remaining in the washer. This can be caused .... I have aKenmore HE2 plus front load washer. I can't seem to get it ...

Kenmore HE2 Plus 3.6 cu. ft. Front-Load Super Capacity ...

www.kenmore.com > Laundry > Washers > Front-load Washers

KenmoreFront-Load Super Capacity Washing Machine (4753) .... super wet, and to spin the empty drum after each load to hear if anything was caught in that gap. .... 1st of all: You cannot use any other detergent than HE rated detergent - PERIOD. ... will create too many suds and clog up the machine, and the clothes won't be clean.

Jan 15, 2016 | Kenmore Washing Machines

1 Answer

Front load kenmore will not spin at end of wash


I have to know a little more detail before I can give you a reasonable solution. Does the washer drum fail to spin period? In other words, if you select rinse cycle manually, after the rinse cycle completes, does it fail to spin? Also, please give me the model number so I can look it up on my tech site. Thx Rick

Oct 06, 2011 | Kenmore HE2 Plus Front Load Washer

1 Answer

Washer didn't spin clothes dry or rinse them, all the lights around the knob flash


Possible failure of the program controller unit. You can confirm this by checking on the voltage on the motor at the time of the cycle. If absent there is a failure of the unit,. If this indicates but without an output then the drive section is faulty.

Mar 23, 2011 | Kenmore HE2 Plus Front Load Washer

1 Answer

My Kenmore He2 at the end of wash my clothes are still heavy with water and a f01 code is flashing


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Sep 08, 2010 | Kenmore HE2 Plus Front Load Washer

2 Answers

The Kenmore HE2 Washer Model 11046462501 Selector dial lights blink continuous with status lights Add a Garment, Rinse, Clothes Clean lights lit. What does this error mean ?


This IS the code for drain problem, pull front panel and remove round filter by turning to the left, probably full of change, feel the pump to the right of the filter if it is HOT, replace it...

Aug 09, 2010 | Kenmore HE2 Plus Front Load Washer

3 Answers

Kenmore Front Loading h2 (110.46462501). Was not spinning out water or going into high speed spin. Replaced belt (was stretched) and will spin out light load but not heavy. Tried heavier load and during...


Hi,
I need to know specifically which lights are on...And if this is an HE2, He2 plus, or HE2T,,,
The lights give the error code to be certain... Also tech sheet behind front bottom panel will help identify error code and how to diagnose exact problem.

Mar 20, 2010 | Kenmore 46462 Front Load Washer

1 Answer

HE2 front loadable washer doesn't move fm wash to rinse to drain


Sounds like the door lock. It will not advance to spin if it thinks the door is open. There is a instruction sheet inside the unit behind the lower panel. That will give the error codes for the flashing lights.

Sep 04, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Code error problem


THIS IS TEMPORARY FIX, NOT A TOTAL SOLUTION. jUST TO GET WATER TO DRAIN AND RESET WASHER. , WITH WASHER POWERED OFF, PUSH AND HOLD START BUTTON FOR 4 SECONDS, RELEASE FOR 4, PUSH FOR 4 RELEASE FOR 4 UNTIL THE FRONT ALL LIGHTS UP AND DISPLAYS 88. sOON YOU WILL SEE YOUR CODES FLASHING, PRESS START BUTTON AS MANY TIMES NEEDED TIL NO MORE CODES FLASHING. tHEN WASHER WILL GO INTO DIAGNOSTIC TEST. aFTER THAT I DO NOT KNOW, BUT YOU CAN WASH 1 LOAD OF CLOTHES AND THEN PERFORM DIAGNOSTIC TEST AGAIN. THAT IS WHAT I AM DOING JUST TO HAVE A WORKING WASHER TOO MUCH TO FIX FROM WHAT I AM READING, SO GOING TO BU A NEW ONE ANYTHING BUT KENMORE. gOOD LUCK, HOPE THIS HELPS FOR IMMEDIATE RESCUE.

Jul 24, 2009 | Kenmore HE2 Plus Front Load Washer

2 Answers

Does anyone know the code to make a HE2 Plus "spin only"?


select the Spin/Drain cycle. any special code would have been the service/diagnostic mode but that wants to run a factory test which involves water fill and agitate

Apr 28, 2009 | Kenmore HE2 Plus Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Brad Brown

Level 3 Expert

17473 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...