Question about Combination Televisions

1 Answer

Samsung DLP HDTV wide screen

I am hearing a loud grinding type noise coming from the inside of the tv. It sounds like some type of fan (maybe) that maybe going bad. I can still watch tv, the picture and program sounds are fine, its just that you can hear this grinding type noise. The noise that I am hearing is similar to the noise that you hear when you are using a tile saw while cutting tile. Thanks for any help offered.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: Samsung DLP HDTV wide screen

Sounds like the colorwheel (used in DLP projection sets with a single DLP panel) is going bad, either the wheel itself or the bearings on the motor driving the wheel are starting to fail. I would recommend getting a professional to service the TV set.

Posted on Jan 11, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hello why do I have a loud buzzing noise coming from my umc combination 21 inch television so bad you cannot here program dialogue ?

You need to send your TV Model first, but in general any strange sounds in a TV come from the followings:
1- High ripple in the power supply of the sound card.
2- Bad polarized capacitors in the sound card
3- High noise in the main power supply (SMPS)
4- For CRT tv, weak insulation of the Line Transformer
5- An external source near your TV set which is picked by your TV and amplified.

Jun 09, 2014 | Combination Televisions

1 Answer

Panasonic TV DVD/VCR combo turns on but right back off can hear the clicking on the inside .. screen does not even come on..

If you hear a clicking that is the relay which is a sign that the tv has partial power. The rest of the power supply is dead though. Usually it is the voltage rectifier and a wire wound resister maybe some burnt circuit traces. Many tvs lose their fly-back transformer and or the horizontal or vertical output transistor and a handful of electrolytic capacitors. Few people repair tvs these days and even fewer want to keep old cathode ray tube (CRT) types tvs anyways. How much for a new flat screen tv of similar size? Likely far cheaper than parts and labour for the other one.

Oct 16, 2013 | Panasonic Combination Televisions

1 Answer

Have Samsung HL S5679W 56 LED 1080p DLP HDTV Problem no picture maybe Power Box??

could be the lamp, ballast, smps board(power supply board) or the main board.

Nov 05, 2009 | Samsung Combination Televisions

2 Answers

I have coloured ghost lines above words portrayed and coloured lines above images. Some noises coming from inside box, some pops and other sounds.

you have convergence problems there are ics that need to be changed and possibly some resistors on the pwr supply deflection bd

Oct 24, 2009 | Samsung HC-P4363W 43 in. TV/DVD Combo

1 Answer

A piercing high pitched buzzing noise when on. The sound volumne does not affect the buzzing. Always very loud.

You didn't post a model number but if this is a CRT TV (non-flat screen) the noise may be coming from the high voltage circuit and may be a warning sign of failure in the near future.

Aug 25, 2009 | Samsung Combination Televisions

1 Answer

TV making high pitch noise, stop working.

It must be the horizontal output transistor, it maybe short circuited. A short in flyback.

Apr 02, 2009 | Combination Televisions

1 Answer

I have a Samsung HLR6167w DLP TV. When i turned it on the image slowly brightened and then heard a noise like a bulb exploding and lost image. We pulled out lamp and its burned out, but now I have a doubt...

After reading up on all possible solutions i found a local shop and bought the lamp. I asked the tech there and he told me that he was 99% positive that it was the lamp .So i installed it and its working thks

Mar 28, 2009 | Samsung Combination Televisions

1 Answer

Television won't start, led flashing

If you post make and model, I can maybe give you an idea.

Jan 28, 2008 | Combination Televisions

1 Answer

Tv power problem

It sounds like you have an integrated power supply issue. This type of supply truns on the horizontal oscillator which provides excitation to the Horizontal Output stage which in turn work with the HV section of the TV the extra LV levels are supplied by this interaction. That tsss noise might be the oscillator trying to work or the startup circuit trying to work. I would check the Horizontal and HV sections for failed components.

Sep 04, 2007 | Toshiba MV13L3 13 in. TV/VCR Combo

3 Answers

Samsung Flat screen 100hz tv - no power

My samsung flat screen tv have sound coming out but no display...anyway to check/help...

May 01, 2006 | Samsung CXM2785TP 27 in. TV/VCR/DVD Combo

Not finding what you are looking for?
Combination Televisions Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Combination Televisions Experts

The Knight
The Knight

Level 3 Expert

66518 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides