Question about Remote Controls
Want to program my philips universal control to work my
citizen vcr/dvd combo player. model # C506DVC
but can't figure out the code for it.
can you help?
I have an RCA tv and i have an all in one 5-in-one remote from radio shack.. i do not have the paper for the remote and i need the code for the remote, any one have it?????????
Posted on Apr 23, 2008
Posted on Feb 17, 2008
You haven't inform the model of your Universal Remote Control, Anyway I will give you a code list for Philips PM435 (One of the most common Universal Remote). You may have a look and try some possible codes. here is the link for Codelist
Posted on Jan 11, 2008
Tips for a great answer:
Dec 21, 2015 | Philips Remote Controls
Jan 25, 2015 | RCA Remote Controls
Oct 21, 2011 | One For All URC-3021 Remote Control
Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY
Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device
code in the following boxes
Jul 13, 2011 | One For All URC-3300 Remote Control
Feb 12, 2011 | One For All URC-4021 Remote Control
Nov 05, 2010 | Philips Magnavox Learning Universal Remote
May 08, 2009 | Philips 5-Device Universal Learning Remote...
Jan 15, 2009 | Philips Magnavox Learning Universal Remote
Sep 07, 2007 | Philips Magnavox Learning Universal Remote
Jun 11, 2007 | Jensen JR400 Remote Control
262 people viewed this question
Usually answered in minutes!