Question about Dishwashers

2 Answers

Whirlpool dishwasher This dishwasher quit in the middle of a wash cycle,we had to empty it and wash by hand. I thought that maybe the breaker to the dishwasher popped but when checked it had not .I then noticed that there are no lights on the electronic key board .Even when not in use there should be one red LED that is lit. It almost seems as if there is no power to the dishwasher. Is there some type of backup safety switch or breaker on the dishwasher itself that I could reset?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 90 Answers
Re: whirlpool dishwasher - Dishwashers

Fuse on control board.

Posted on Jan 13, 2008

Re: whirlpool dishwasher

Same issue I have, replaced the circuit board and then the keypad, still no lights. I used a meter to test I was getting power to the board as far as possible using the included circuit diagram. No luck.


Posted on Feb 26, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

No power or lights in the front panel

Check the fuse / circuit breaker inside washing machine. There may be a extra control circuit fuse normally on the control PCB.

May 28, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Dishwasher does not wash simply beeps continously and wont start the rinse cycle with green flashing pre rinse light. Have tried turning off at power and have checked all connecting pipes. Have emptied...

If your dishwasher is a whirlpool or IKEA then maybe the answer given by emmanuelr in "Whirlpool dishwasher ADP5962 F7 error code" may do the trick. It certainly worked for me. Bit technical but if you are happy taking the sidepanels off the thing then the fix may be easy.

Apr 06, 2010 | Whirlpool 24 in. GU2500 XTP Built-in...

1 Answer

It takes water. heats,and will empty but do not wash

can you hear the motor/pump running during the wash cycle. pump or spray arms maybe clogged with debri.

Jan 05, 2010 | Whirlpool 24 in. DU1100XTP Built-in...

1 Answer

Dishwasher is "tripping" the breaker & not draining.

I had the same problem with a Hobart AM8 passthru dishwasher. The electrician determined that some of the wires had become exposed and were wet, thus shorting things out and tripping the breaker.

Jan 08, 2009 | Bosch Dishwashers

6 Answers

Whirlpool Quiet Wash Plus Dishwasher is not despensing the detergent properly. After a wash cycle there is still some left.

My Whirlpool Quiet Wash plus dishwasher seems to have died. No power. None of the buttons work, it quiet mid-cycle. No breaker issue, my garbage disposal runs off same breaker and is working fine. Any ideas? I was thinking the comp. board that the buttons work off of is fried. If this is the case any idea how much to replace it? Would it be cheaper to buy a new dishwasher?

Apr 21, 2008 | Dishwashers

1 Answer

Whirlpool d/w is stuck on wash cycle

Is it filling and emptying at the same time???? If not could be a heat problem. How long do you leave it running for?

Jan 03, 2008 | Whirlpool 24 in. DU1050SS Built-in...

2 Answers

Zanussi Aquapulse DE6544 not emptying

Zanussi Aquapulse dishwasher - is filled with water inside, is not washing and the lights keep flashing on and off - has anyone any idea what may be wrong with it?

May 27, 2007 | Zanussi 24 in. DE6544 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

3,842 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers


Level 3 Expert

4342 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides