Question about Kenwood KDC-MP232 CD Player

1 Answer

CODE ??? I BOUGHT THE KDC-MP232 CD PLAYER (USED AND WITHOUT A REMOTE) AT RESALE SHOP WITHOU FIRST TRYING TO SEE IF IT WORKED, I DON'T KNOW WHAT THE CODE IS TO BE ABLE TO USE IT. IS THERE A UNIVERSAL CODE THAT CAN BE ENTERED MANUALLY TO USE THE STEREO ? AS SOON AS THE FACE IS PUT ON THE CODE INFO IS NEEDED. THANKS IN ADVANCE FOR YOUR HELP.

Posted by on

  • OFOSUISAAC Aug 26, 2008

    CODE PROBLEM

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Unfortunatly you do need a remote to enter codes

If you can borrow one from a friend then this will work for you

KENWOOD SECURITY CODE CLEAR procedure


Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

Posted on Jan 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know which pin is for what


hi...try and check this site, there are lots of pdf about Kenwood KDC-MP232 CD Player...http://search.4shared.com/q/50/kenwood

Sep 24, 2011 | Kenwood KDC-MP232 CD Player

2 Answers

Code for kenwood car stereo kdc- mp232


showing "PROTECT" ON DISPLAY WHEN POWERED ON

Mar 18, 2010 | Kenwood KDC-MP232 CD Player

2 Answers

Kenwood KDC-319 CD Player Code dont have a


dont put a code all those radio say that when first power up just push the source button to do what you want

Sep 11, 2009 | Kenwood KDC-319 CD Player

1 Answer

I Forgot code to my KENWOOD MP232 Car Stereo


i have the same radio the stock code on mine is 0000 try that ive also seen kenwood use 1234 or variants of it unhook the battery for a few mins and rehook it up it should reset the code to stock.

Jul 09, 2009 | Kenwood KDC-MP232 CD Player

1 Answer

Get out of demo mode


Push the control knob towards fm or am.......select the demo display......press teh control knob for at least 2 seconds....that should do it

Oct 07, 2008 | Kenwood KDC-MP232 CD Player

1 Answer

Kenwood_kdc_mp232_cd_player


please i dont remember my 4 digit and i cantnot use my kenwood kdc-mp232 please send me a 4 digit

May 01, 2008 | Kenwood KDC-MP232 CD Player

1 Answer

Code Problem with a kenwood kdc-mp232 car audio


• How to clear the programmable security code (For models
of destination “K”)
∗ Operation 1
1. While “– – – –” is being displayed, press [->> ] key for 3
seconds or longer while pressing the [AUTO] key. This
makes the “– – – –” display disappear.
2. Input “KCAR”, using the remote controller.
Press [5] key of the remote controller twice (Input for “K”)
and press [->> ] key.
Press [2] key of the remote controller 3 times (Input for
“C”) and press [->> ] key.
Press [2] key of the remote controller once (Input for “A”)
and press [->> ] key.
Press [7] key of the remote controller twice (Input for “R”)
and press [ ->>] key.
3. The security is cleared and the unit enters STANDBY
source.
4. If wrong codes are input, “– – – –” will be displayed again.

Jan 03, 2008 | Kenwood KDC-516S CD Player

1 Answer

Code Problem with a kenwood kdc-mp232 car audio



KENWOOD SECURITY CODE CLEAR procedure


Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

Dec 03, 2007 | Kenwood KDC-MP232 CD Player

2 Answers

Security


"Protect" isn't for security on a Kenwood; it's caused by a problem with the speaker output. There may be a defect in the CD player, or you may have a blown speaker or a shorted speaker wire in the vehicle. Try disconnecting all the speakers and see if the unit still shows "protect" when you turn it on. If it still shows the "protect" message with no speakers connected, the unit needs to be serviced; if not, re-connect the speakers one at a time until you find out which one is causing the problem.

Aug 10, 2007 | Kenwood KDC-MP232 CD Player

1 Answer

Demo mode problem


From the user's manual (pg.23): 1. Select the Demonstration Mode. Push the Control knob towards [FM] or [AM]. Select the "DEMO" display. 2. Set the Demonstration Mode. Press the Control knob for at least 2 seconds.

Feb 13, 2007 | Kenwood KDC-MP232 CD Player

Not finding what you are looking for?
Kenwood KDC-MP232 CD Player Logo

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4989 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82285 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...