Question about Acer AL1511 15" LCD Monitor

1 Answer

No triggering When I switch on my Al15511 acer monitor it continously flashes acer as if you have just turned on the monitor without any signal applied.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 163 Answers
Re: no triggering

Hard drive is most likely dragging the 5V circuit down. Download a free Mepis CD and pull the drive to see if it will boot and run on the fly..

Posted on Jan 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My samsung Tablet's Screen keeps flickering continously

Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.

Good luck.

Jul 07, 2014 | Computer Monitors

1 Answer

Acer x193w Monitor won't come on flashes blue light you see word "Acer" it goes to flashing Yellow light and keeps repeating that.

you disconnect the monitor from PC
& see: it will show no signal or check signal cable. that means the monitor is OK problem is in PC. may be you PC is not booting properly. if monitor does not come on there may be fault in the main board of your monitor.

Oct 13, 2011 | Acer X193W LCD Monitor

1 Answer

Dear admin, i would like to ask you something... i have monitor ACER AL1716.. recently when i started my PC, the monitor suddenly turn on and off continously (you know when we turn on monitor, it showed...

I suspect that the problem is with your PC, and in particular your video card. The fact that your monitor is displaying the logo indicates that the monitor is not receiving a signal from your computer. You may want to try hooking the monitor up to another PC and see if that is the problem. The fact that your monitor turned off and on for a few times also indicated that the signal from the PC video card was sporadic and finally failed leaving you with the monitor logo. Disconnect the PC from the monitor and see if the logo is there. Also check the cable from your video card to your monitor to see if the cable is bad. You may have to borrow a video cable from a friend to test this out.

Apr 22, 2011 | Acer Computer Monitors

1 Answer

Acer al1713 monitor and the power led flashes form yellw to green

The short answer, replace all of the capacitors. They can be bad without swelling. And there may be one 47mf/16v off to itself, if it fails, monitor will not come on. Also, check the menu or mode setting to make sure your VGA/DVI agrees with the cable if the monitor has both.

Jan 01, 2010 | Acer AL1713 17" LCD Monitor

1 Answer

Monitor power light flashes yellow/green

the monitor power light turns green and then switches back to yellow but there is no signal.

Nov 28, 2009 | Acer AL1917W LCD Monitor

2 Answers

NO Display

time to replace the monitor, u fried the board, been there done that

Jun 20, 2009 | Samsung SyncMaster 793MB 17" CRT Monitor

1 Answer

The screen starts up too slow

unscrew your lcd monitor then check for loose connections. if you know how to solder check the circuit board for loose parts..

Feb 05, 2008 | Acer AL1511 15" LCD Monitor

1 Answer

Monitor repeatedly flashes Acer logo and computer display in cycles

We had the same problem with the 17" we bought in Aug. Sent it back for repair. Acer sent it back without fixing the problem. Started doing it again in Nov. This time I called a supervisor and they sent me a new monitor. Well yesterday it started doing the same thing. You can fix it temp buy unplugging it and holding down the on-off switch for 30 seconds. Please let me know if you have a better fix.

Dec 13, 2007 | Acer AL1715 (Black, Silver) 17" LCD...

2 Answers

Acer monitor

What do you mean by it takes awhile to come on? Sometimes with these monitors depending on the type you have it takes time for the PC to pick up the signal. I have my PC hooked up to a KVM switch and it takes about 10 to 20 seconds for my monitors signal to be recognized.

Nov 15, 2007 | Acer AL1916W 19" LCD Monitor

1 Answer

Philips 170C Monitor

i believe your monitor signal cable is bad or twisted.try straightening the data cable that connects to your cpu, if it doesn't work, replace the signal cable.

Feb 26, 2007 | Philips 170C4FS 17" LCD Monitor

Not finding what you are looking for?
Acer AL1511 15" LCD Monitor Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computer Monitors Experts

Steven Wander
Steven Wander

Level 3 Expert

574 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers


Level 2 Expert

49 Answers

Are you an Acer Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides