Question about Kyocera FS-2000D Laser Printer

3 Answers

Any clue what error code 6030 is?

We recently updated the Firmware from the 0150 error code, it worked fine for a couple of days and now is presenting this error code? Does anyone have a clue as to what it is?

Posted by on

  • FerretFenzie Jan 16, 2008

    Thanks, we replaced the fuser assembly and it appears to have resolved the problem. Thanks for the assitance and advice, couldn't find the code on Kyoceria's site to save my life.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

I had the same problem. Pull the Fuser and check Conector.Sometime pieces of paper inside the Conector raises an error.

Please Rate .

Posted on Aug 15, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kyocera Master
  • 1,113 Answers

6030 error indicates thermistor or heat lamp in fuser or thermal cutout is open circuit, replace fuser assembly is the fix.

Parsonsr note: 4 codes start with F and the rest are all numbers like 6030 or 0150

Posted on Jan 16, 2008

  • Soulvisitor
    Soulvisitor Jan 16, 2008

    no you wont find the code it is a service error, only found in service manual



    Thanks for rating

    S ;)

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Hi ,
Kyocera prointers error codes should start with a letter ie A-G. Can you post this error code adn i can tell you whats up with it.

Cheers,
R

Posted on Jan 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix the error code c0150


You will need a service engineer to fix this problem it will either need a new main board or a firmware update


0150. Engine PWB EEPROM error Detecting engine PWB EEPROM communication error.

Mar 12, 2015 | Kyocera "FS-3540MFP Copier, FS3540"

1 Answer

Kyocera fs-3900dn 0150:0000007 error


Sounds like a Engine firmware failure. The clue is the low page count (the 00007).
You will need to upgrade your firmware and contact your local Kyocera sales comany to get a patch to correct the missing serial number and MAC address.

Aug 25, 2011 | Kyocera FS-3900DN Laser Printer

1 Answer

Linksys WRT54G: Has worked great for years. It recently reset itself (lost encryption). At same time: wireless works for about 60 secs then disconnect; then next day, wireless works perfect. Then:...


if it is working but intermittently most probably you may need to update your routers firmware online... go into your routers GUI " Graphical User Interface settigns page there should be an option for you to update the routers firmware... also try calling the routers manufacturer give them what model your router is for them to check and give you info if there are updates available for the specific router you have. if it connects it is ok it it gives an error something is incorrect in the settings.

Jun 28, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

I have a kyocera FS-2000D with error code: Call for service 0150:0000049. Help...thanks in advance


Error code 0150 is an engine EEPROM communication error. The engine board might need to be replaced. I have heard that sometimes a defective developer unit could cause this same error code. I would try swaping a develper from a working FS-2000D first.

May 20, 2010 | Kyocera FS-2000D Laser Printer

1 Answer

I now have 2 HP LJ P3005n printers within the past 3 days that have stopped working. 1st error code on printer #1 is = 49.4C22 and 49.4C02 and the 2nd printer is now displaying error code = 49.4C02. What...


The codes indicate firmware errors (possibly a failure of the formatter board, but more likely firmware). Up-to-date firmware is available for download at www.hp.com/support/LJP3005. Read the installation instructions for the firmware update. If you have ANY doubt AT ALL about your ability to successfully update the firmware, pay a shop to do it for you. A failed firmware update may not be recoverable, and the formatter board is rather costly.

Oct 20, 2009 | HP LaserJet P3005n Printer

1 Answer

Error 0150: eeprom error, requires firmware


common issue....just update firmware and your good to go

Apr 13, 2009 | Kyocera FS- 4000DTN Laser Printer

1 Answer

Call Service 0150:0043136


A Kyocera-Mita technician willl have to update the firmware.

Jan 28, 2009 | Kyocera FS-2000D Laser Printer

1 Answer

My Kyocera fs-3900dn has the message: call service 0150:0040557. What does it mean?


0150 - Engine PWB EEPROM error. Detecting engine PWB EEPROM communication error.

Solutions:
1. Switch the printer OFF; unplug the power cable; wait 20 seconds; plug in the power cable; switch the power ON, If the error comes back follow the next solutions:
2. Update / Burn the latest firmware version. You may need to call a Kyocera Service Provider because you need a CF card (compact flash memory card) and the FIRMWARE.
3. Replace the Engine PWB (a board) - again you have to call a Kyocera Service Provider.

Dec 30, 2008 | Kyocera FS-3900DN Laser Printer

2 Answers

Kodak Easyshare 5300, fatal error 3812


That's an error with the ink. Try updating the firmware on the printer. Here is the link to the latest firmware from the Kodak website.

http://www.kodak.com/global/en/service/downloads/dln_ekn033540.jhtml?pq-path=9106

Dec 25, 2007 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Kyocera fs 3900dn printer


It needs a firmware update, very common, it would most likely be under warranty, if not post email so I can give you the firmware update required and I will instruct you on how to upload it to your quality printer.

Nov 27, 2007 | Kyocera FS-3900DN Laser Printer

Not finding what you are looking for?
Kyocera FS-2000D Laser Printer Logo

3,025 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Kyocera HP Expert

Level 3 Expert

523 Answers

Chris Schutte

Level 2 Expert

51 Answers

yadayada
yadayada

Level 3 Expert

80339 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...