Question about Nintendo Wii Console

1 Answer

Input select sttting

Input select setting

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Normally, your TV or VCR is probably set to display the television channels you watch, through a standard cable input. In order to play your Nintendo using the A/V cables, we need to tell your TV or VCR to switch from the normal tv channels, and instead display the signal coming in from the A/V cables of your Nintendo system. There is no one particular way to do this, as it varies between brands, but below is some information that may help.
Quick Tip: Grab the original remote control for the TV or VCR you have plugged your Nintendo into, and look for a button that could be labeled:

  • TV/Video
  • Input Select
  • Line or Line In
  • Source
  • AUX (auxiliary)
  • EXT (external)
  • any other button that seems to indicate it would switch between the TV signal and the game system.
If the above tips did not help, it is possible your Input Select is a little more difficult to locate. Here are some other common ways to access an Input Select:
  • A button on the front of your TV or VCR located behind a door or a hidden panel, or located on the original remote control that came with the device. If you are using a universal remote, it may not work when pressing the "input select" button. If it does not work, try to locate the original remote.
  • A high or low end channel. Try channel surfing through every channel, even the ones that do not normally broadcast a TV show. Many times the input select is a high channel such as 90, 91, 92, 93, 99, or even 999. You should also try low channels such as 0, 00,001, 1 or even 2. For some televisions, you may need to manually select these channels by using the keypad on the TV or remote control.
  • Found within an on-screen menu. Search the menu for words such as Input, Setup or Source. Select one of these words, and another menu will usually appear that asks you to select between TV and either AV, AUX or Line. Select AV, AUX or Line to display the Nintendo game.
If you are still unable to find your input select, you may want to consult the operation manual that came with your TV or VCR, or contact the manufacturer directly.

Posted on Nov 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My phone has a virus how can I clear it off my phone?


only master reset
setting phone sttting reset phone first removed ur sim or mmc chip
fist do copy all ph contact to sim

Oct 18, 2013 | Cell Phones

1 Answer

Screen has darkend and wont get briter


Are you running on batteries? Has you laptop go into hibernation? You can adjust display dimming in power stttings, by right clicking the Batery icon in the taskbar notification area and opening the power settings. if that's whay you mean? I need more information to give a informed solution. If you plug in the laptop to AC does it change? Try re boot.

Nov 05, 2012 | Samsung Q310-34P Mobile Notebook

1 Answer

Wht is the torque setting for the rocker cover bolts on a 1340 evo engine


Hi Anonymous, in a criss cross pattern and in 5 lb. increments, 5/16" bolts 20 ft lbs. 1/4" bolts 10 ft lbs. Have nice day.

Feb 23, 2012 | Harley Davidson Motorcycles

1 Answer

Liquids in refrigerator freeeze slush up. started last week with setting of 5, still does the same with sttting of 1.


he description of the problem shows that the thermostat of the fridge is faulty as it does not cut the power to the compressor when the set temperature is reached. It needs to be replaced. Please replace the thermostat with one of exactly the same specifications as the present one.

Apr 22, 2011 | Refrigerators

1 Answer

How to enable the input of lcd


hi,
u can sellect input by following setup

1. Press INPUT. on remote
(A list of selectable sources appears).
2. Press INPUT again to select the input
source.
( An image from the selected source automatically
displays).
Each time INPUT is pressed, the input source
toggles.

If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2, you may need
to change the input signal type setting on the "Input
Select" menu.

1. Press MENU to display the MENU screen,
and then press c/d button (on remote) to select "Option".

2.Press a/b button (on remote) to select "Input Select", and then
press ENTER.

3.Press a/b button (on remote) to select the signal type you
want to set, and then press ENTER.
4.Press MENU to exit.

just try these. need further help feel free to contact.
ok.

Dec 20, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

OK, here's the problem - Samsung model RB1955SH - plug refrig in it cools both frig and freezer to desired settings - however, once system reaches stttings and turns off compressor, will not restart system...


the temp controller is bad in the fridge once it reaches cooling temp desired it cause the temp comtroller to go into a shut off mode due to being weak on the temp sensor tube

Jan 18, 2010 | Refrigerators

2 Answers

Denon receiver AVR-3300: Unstable source selection


Go over here: http://denon.custhelp.com/cgi-bin/denon.cfg/php/enduser/std_alp.php?p_sid=1NlVrsDj

I have some Denon components myself and had some problems. Ask them here, and within a day you should have solution for this problem.

Probably you have to reset the device to factory settings.

Jul 22, 2009 | Denon AVR-3300 Receiver

1 Answer

Unable to play DTS-HD & True-HD


What do you hear? Do all other modes work ok?

If Audio Select (Page 44 and 98) is set to HDMI you will hear silence if no HDMI signal is present. I think AUTO is the best choice here.

-------

On Page 98 of the manual it says a bunch of things concerning automatic signal detection and input selection.

Initial configuration D) INIT. CONFIG
Use this feature to select the settings of the audio input jack select, active decoders and extended surround when you tum on this unit.
....

Audio select AUDIO SELECT
Use this feature to designate the default audio input jack select setting (see page 44) for the input sources connected to the DIGITAL INPUT jacks when you tum on the power of this unit.


HDMI set E)HDMI SET
Use this feature to select the component to play back HDMI audio signals.

Support audio S. Audio
Use this feature to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit.
...

CHOICE = RX-V663

FUNCTION
Plays back HDMI audio signals on this unit. The HDMI audio signals input at the HDMI input jacks of this unit are not output to the HDMI component connected to the HDMI OUT jack on the rear panel of this unit.

CHOICE = OTHER
HDMI component connected to the HDMI OUT jack.

NOTES
This unit transmits audio and video signals input at the HDMI input jacks to the HDMI out jack only when this unit is turned on even if "S.AUDIO" is set to "OTHER".

I'd look in these areas for specific guidance.

Apr 22, 2009 | Yamaha RX-V663 Receiver

1 Answer

Not able to record audio through a TV tuner card


Olug it into audio input on mobo or sound card. IF that doen work, open up sound card and go through playback and recording stttings, ticking of line in and auxillary, and push levels up

Apr 11, 2008 | Computers & Internet

Not finding what you are looking for?
Nintendo Wii Console Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

899 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...