Question about Neff 18 in. S5943 Slim-Line Built-in Dishwasher

1 Answer

Neff slimline dishwasher type S5946

Hi there

I have a Neff slimline integrated dishwasher and it initlally starts up fine and goes for about a minute- with water going into the machine. Then it just cuts off though and makes a humming sound. Any ideas

Posted by on

  • jenjen28 May 25, 2009

    I have the same problem on my Neff s5943X. It sounds like it starts well then just stops, no water going in but can hear it still trying to work, and the blades have stopped going round?!?! Any ideas?!?!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Hi there sounds like your wash pump has burnt out

Posted on Jan 11, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My CDA WC430IN slimline integrated dishwasher isn't working. The power comes on but the program buttons aren't working - none of the programe type lights will light up. Have tried switching off and on,...


Try unplugging the cord from the outlet or turning the fuse off from the fuse box that goes to the dishwasher. Wait a few seconds then plug back in to set if it resets itself. Usually if something goes wrong with these types of applicances the whole circut board is replaced by the repair man. Which by the way is cheaper if you can do it yourself.

Sep 20, 2014 | Dishwashers

1 Answer

Just moved into a house with fitted NEFF dishwasher, never had one before and no manual left. Where do salts go? Thanks


Hi there,

The salt goes in the salt compartment in the base of the dishwasher. Open the door and pull the lower basket out. You should then be able to see a cap near the front-left corner of the base of the dishwasher. Unscrew this cap (anti-clockwise) and fill the compartment with salt all the way to the top - or with as much salt as you have in the packet - then screw the cap back on firmly, but do not over-tighten it. The salt compartment will (or should!) be full of water and some will spill out as you fill it with salt. This is totally normal and not indicative of any problem.

Do not use any type of salt which is not sold specifically for dishwashers. The dishwasher can be used without salt but it is not advised and may result in a white film being left on your cutlery, glassware and/or dishes.

It may also be possible to provide a user manual in PDF format which you can download, but I would need to know the model number. If you don't know the model number Most Neff/Bosch dishwashers have the model number laser-etched into the stainless-steel at the top of the inner-door or the rim of the washing compartment. Please click on the link below for a guide to locating the model number of your dishwasher. (Neff is a Bosch owned brand)

http://www.bosch-home.co.uk/type-plate-details.html?aftersales=dishwashing&aftersales=dishwashers~16468

Hope this helps. Please let me know if you would like the manual or need further assistance.

Regards,
BElectric

Feb 28, 2011 | Neff S5946 Built-In Dishwasher

1 Answer

Spray arms not rotating


Check pump in the dish washer. Clean and check!

Apr 28, 2010 | Neff S5946 Built-In Dishwasher

1 Answer

Neff Integrated slimline - Programme does not complete.


IT SOUNDS AS THOUGH ITS NOT HEATING DETERGENT AND RINSE AID INTRODUCED INTO COLD WATER WILL GENERATE A LOT OF FOAM,IS APPLIANCE WARM INSIDE AT END OF CYCLE?OR IT COULD BE TOO MUCH RINSE AID IF IT IS FILLED WITH RINSE AID AND YOU ARE USING A TABLET WITH RINSE AID COMBINED IT WILL HAVE TOO MUCH TO USE IN ONE WASH.

Aug 03, 2009 | Neff Dishwashers

1 Answer

Neff s5946 slimline built in dishwasher. Fills with water, clonking sound in pipe and does not register on programme, although pump working.


if you only hear the clunking sound while the dishwasher is filling then the inlet valve is bad.. i would replace it because if it fails completely you could possibly have a flood..

Feb 20, 2009 | Neff 18 in. S5943 Slim-Line Built-in...

2 Answers

Fitting a new front panel to the NEFF 54432 integrated dishwasher


My Neff integrated dishwasher has two holding screws in the top corners and then two hidden screms half way down the side behind plastic covers. Loosen these side screws, remove the top two corner screws and then the door cover/panel should lift out of two lugs at the bottom.

Aug 13, 2008 | Neff 24 in. S5443X2 Built-in Dishwasher

1 Answer

Neff integrated dishwasher


there are some screws inside the door, around the edge. These would be the first to undo then I think the door would have o be pulled up slightly to relaease.

Mar 28, 2008 | Neff 24 in. S5443X2 Built-in Dishwasher

Not finding what you are looking for?
Neff 18 in. S5943 Slim-Line Built-in Dishwasher Logo

Related Topics:

635 people viewed this question

Ask a Question

Usually answered in minutes!

Top Neff Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cesar Quant
Cesar Quant

Level 2 Expert

74 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Neff Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...