Question about GE (DH27831) 2.4 GHz Twin Cordless Expansion Handset
SOURCE: can't register the handset
I have the GE 28811 series and to register mine you have to unregister it first then go to your phone setup menu and select register and it tells you to hold the base page button for 5 seconds then hit your program button on the phone and it registers it.hope that helps.
Posted on Sep 01, 2008
Press menu button, the LED readout should say "press pager button and wait for beep".
I have a GE21900FE1 and it worked perfectly
Posted on Dec 03, 2008
SOURCE: handset needs registration
I had the same problem and have seemed to figure it out. Take the handset near the base. Press the Prog/Mute button at the bottom of the phone. It will display a message to press the Pager on the base. The phone will then ask you for a Handset Name. Press the Prog/Mute button again and it will name the handset Handset 1.. it is working
Posted on Feb 18, 2009
I had the same problem, and restoring to default settings did not seem to work either. I just opened the back, unplugged the battery, plugged it back in, and now it works again.
Posted on May 20, 2009
Tips for a great answer:
Jan 15, 2016 | Uniden D16883 Phone
Jan 01, 2008 | EnGenius SN 920 Ultra Cordless Phone
Mar 18, 2014 | Uniden DECT 6.0 Cordless Phone ID
Jul 21, 2010 | Uniden Cordless Phone
Aug 26, 2008 | Uniden Cordless Phone
Jul 31, 2008 | Uniden Cordless Phone
Jan 10, 2008 | Phones
Dec 29, 2007 | Uniden TRU9488 Phone
Apr 10, 2007 | Uniden Cordless Phone
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: