I have a Hotpoint Dishwasher DWF40. I was given it as it did not clean the dishes, I have found that it does not heat the water. The heater has a resistance of 25 ohms, which seems good and the water level/pressure switch is operating with water in the sump. I cannot find any thermostats? Have you a wiring diagram or other suggestions Best regards Frank
when the dishwasher finish drying cycle, the dishes feel hot, but it is still wet. for my previous...
(More)
when the dishwasher finish drying cycle, the dishes feel hot, but it is still wet. for my previous dishwasher it is a little bit wet when it just finish drying cycle, but if i leave dishes inside for 30 minutes, it get dry. but for this one i am using now, it feel totally watery no matter when drying cycle just end or after a while. thanks!
can't get it to go on keeps reverting to rinse only and when it is canceled and I try to put normal...
(More)
can't get it to go on keeps reverting to rinse only and when it is canceled and I try to put normal wash on it reverts to rinse.