Question about Konica Minolta bizhub C351 All-In-One Laser Printer

2 Answers

Minolta bizhub c 351 code c 3451 - Konica Minolta bizhub C351 All-In-One Laser Printer

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 44 Answers

If you go into tech mode-system1- initialization-system error clear-press start and reboot.

Posted on Nov 29, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Konica Minolta Expert
  • 158 Answers

This error code means the fuser rollers failed to heat up you can reset the code by turning the machine off and hold down the utility\counter key while you turn the machine onwhen the trouble reset button shows on the touchscreen touch it and when it says ok turn the machine off then back on if the machine gives this erro again you will have to have the fuser replaced

Posted on Nov 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a proplem in konica minolta bizhub c352 how to sort the problem i have an error code 3451


If the code comes back do not reset, you are messing with the Fuser the Hot part. Continuing to reset without a technician looking at and or replacing it, the fuser can catch on fire and that would ruin a perfectly good day. ENSURE YOU WAIT THE 10 SECONDS

1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.

Jun 15, 2016 | Konica Minolta bizhub Office Equipment &...

1 Answer

Bizhub c352 error 3451


If the code comes back do not reset, you are messing with the Fuser the Hot part. Continuing to reset without a technician looking at and or replacing it, the fuser can catch on fire and that would ruin a perfectly good day. ENSURE YOU WAIT THE 10 SECONDS

1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.

Jun 15, 2016 | Konica Minolta bizhub Office Equipment &...

1 Answer

C- code for bizhub 350 c 3451


Warm up failure You have to push the reset button on the right side of the copier

Oct 18, 2013 | Konica Minolta bizhub Office Equipment &...

1 Answer

C code for bizhub350 c-3451


Warm up failure, restart with the reset button on the right side of the copier

Oct 18, 2013 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Malfunction C-3451


There are a few things that may cause the problem: You will need to Exchange the Fusing Unit, Power Supply and Control Board. .... so long story short YOU better call a technician for that code.

Feb 21, 2011 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Eror code


sorry i am not familiar with error codes.
I am more for user support.

Nov 10, 2008 | Konica Minolta bizhub C450P Laser Printer

Not finding what you are looking for?
Konica Minolta bizhub C351 All-In-One Laser Printer Logo

1,131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6680 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

Ben
Ben

Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...