Question about HP Compaq 2510p Notebook PC
Call 1800-337-9234 they will tell you. they are soft and hardware support.
Posted on Nov 19, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 29, 2014 | HP Pavilion Computers & Internet
restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer
Windows Advanced Options Menu
Please select an option:
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Start Windows Normally
Return to OS Choices Menu
Use the up and down arrow keys to move the highlight to your choice
Select safe mode with networking to download
A CMOS BIOS password recovery tool
Editors note: This tool should only be used by experienced computer users. Please see the enclosed read me if you would like to run it from Windows. Failure to follow instructions (from Windows) will cause your anti-virus to flag this as a virus.
http://majorgeeks.com/Dr._Freeware_System_Utilities_d6416.html Dr.Freeware System Utilities which includes data recovery software, data backup, password reset tools for Windows helps you to maintain your system. Dr.Freeware is freeware, you can download and use it for free.
password cracker free
or you could
select safe mode with command prompt
Click start run type cmd press Enter
black screen should open DOS mode
this will vary depending on your operating system
type in net user username
For eg. If you want to change administrator password , type net user Administrator
it will prompt you to enter the new password
enter the new password and the password is changed
Then type at the C:\> prompt: type Youll notice the password is gone.
or for the bios password
and hit Enter. You'll see a dash (-) at the DEBUG prompt. Now type:
o 70 2e
which will show as -o 70 2e at the DEBUG prompt. Hit Enter. Then type:
o 71 ff
and hit Enter. Finally type:
and hit Enter one last time to quit DEBUG back to the C:\> prompt.
Now you're ready to reboot your PC, and press the appropriate key or key
combo (look it up in your motherboard manual if you don't know it) to access
your BIOS Setup.
hope this helps
Then type at the C:\> prompt: type
Youll notice the password is gone.
Jul 25, 2012 | HEWLETT-PACKARD Hewlett Packard Power...
Jun 20, 2012 | HP ProBook 4310s Notebook
You will have to remove the power cord, remove the battery
and remove the CMOS Battery that is located on the motherboard. On most
computers you will have to take the laptop apart to get to the cmos
battery. On some systems it looks like a silver nickel that you will need
a small flat head screw driver to pop it out. On other systems it will be
inside a vinyl covering and has a cable that plugs into the motherboard.
Once you remove the CMOS Battery, let it sit for an hour or two then put it
back in and put the laptop back together. Boot the machine and you'll
probably have to go into the Bios or System Setup because the system will have
forgotten the date, time and password.
If the password is not reset then you will have to short the password jumper on the motherboard with a screwdriver or there may be a pin on the motherboard that you can remove to reset it. I would consult the owners manual before attempting either of these two options.
I found the info below in the owners manual
1.2 Resetting the Computer
If the computer you are servicing has an unknown password,
follow these steps to set a new password. These steps also
1. Enter an incorrect password and press enter.
2. Repeat step 1 two more times.
After the third entry of the incorrect password, the computer
responds with a System Disabled message and provides an
3. On another computer running Windows XP, download the
unlock6.exe utility from the HP Channel Services Network
(CSN) Web site at http://www.hp.com/partners/csn. Copy the
unlock6.exe utility into the root directory (C\ drive).
4. Access MS DOS by clicking Start/All Programs/
5. Enter unlock6 xxxxx 0, where xxxxx is the password
generated by the computer in step 2.
The computer responds with another system generated
6. Enter the password generated in step 5 on the disabled
computer to enter the system BIOS. In the BIOS, navigate
to the Security tab and Administrator Password. Enter the
password generated in step 5 as the current password. Enter
a new password to change it.
7. The password has been reset and all CMOS settings have
Apr 25, 2012 | Computers & Internet
Jun 06, 2011 | IBM ThinkPad X20 2662 Notebook
Jun 03, 2011 | Dell Vostro 1500 Notebook
HP/Compaq/Acer InsydeH20 Bios Password Service
with 8 digit HashCode
Support model: Compaq CQ40, Compaq CQ45, HP DV3, HP DV4,DV5....
We can help you remove this password.
You just entering 03 times wrong password, then your screen will show 8 digit code number (view below image):
Let's me know your 8 digit code and Model Name ( email@example.com)
GO TO >> Master password - Bios Password
Apr 11, 2011 | HEWLETT-PACKARD Pavilion dv7-1175nr PC...
Sep 26, 2010 | HP xw8200 PC Desktop
Aug 10, 2010 | HP Compaq Presario CQ70-120US Laptop
Nov 19, 2009 | HP Compaq 2510p Notebook PC
104 people viewed this question
Usually answered in minutes!