Question about Whirlpool Ovens

1 Answer

My whirlpool oven door is locked. After cleaning

My whirlpool oven door is locked. After cleaning it it won't unlock and has a code FSEI?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

HI. This will indicate that the door lock mechanism is damaged. follow the procedure below to address further.


If the door is latched:

A. Disconnect power from unit.
B. Check wires and connectors from control to door switch, then from door switch to control. If there is no damage to the wires and all connectors are okay, proceed to step C.
C. Replace door switch.
D. Re-apply power.
E. Press and hold any key down for 1 minute to clear F5 failure code from memory. F2 will appear. Press CANCEL and observe for 1 minute to ensure operation is correct.


NOTE_ This will, normally, lead to the replacement of the door latch assembly.

Posted on Nov 20, 2009

  • Michael Masters
    Michael Masters Nov 20, 2009


    • This could possibly be a simple control fault.In this case, a simple reset will release the latch. You can initiate a reset, by unplugging the unit for five minutes. This will force the unit to reset. Once the five minutes have passed, simply re-introduce power to the unit, and observe the door latch actions. If the error is still an issue, replace the door latch assembly.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I set my oven to self clean it states FSEI. What does this mean?


Hi

F5E1 means the self clean latch will not lock.

Try pressing down any key for 1 minute, F2 may appear, then press CANCEL and see if that clears the fault, if not you may have a faulty door switch.

Dec 17, 2010 | Ovens

2 Answers

Self cleaning oven


Pheo,
Turn Breaker/Fuse for the stove, your electrical panel, “OFF” and then “ON”, wait 20 - 30 seconds and the door should unlock.
It may be that the temp sensor is going out and you'll need to have that looked at soon.
Bill

Nov 21, 2007 | Whirlpool GBD307PDS Electric Double Oven

2 Answers

I have a whirlpool oven self-cleaning.. get code F5E1 or FSEI, when i set the self cleaning?


I live in apartment with a Whirlpool dishwasher and oven. Today was my first day to do automatic clean. After two minutes the "F5SEI" would pop up, then the door would unlock. I repeated this a couple of times. My mind wondered about a water source; perhaps the dishwater. Fortunately, I had a load of dishes ready to go. So I started the dishwasher, then the automatic clean on the oven. Behold! They work together like homies :)

Nov 15, 2010 | Whirlpool Ovens

1 Answer

My oven code is F5E1 , my oven was in self clean , now the door is locked


F5E1 is door latch assembly. One way that may work to unlock is to turn circuit breaker to stove off for few seconds then turn back on and door lock should activate and unlock. If not you are going to have to replace the door lock assembly.

Mar 03, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

I am trying to start my self clean and a minute after I hit start a beeping with this code appears: FSEI


Make sure that the door latch is completly locked and then try again. If it is locked and you are getting this code the door latch assembly is bad. The oven sensor would be fine since you get no codes during normal baking. Problem is in door lock system

Feb 28, 2010 | Whirlpool RBS275PD Electric Single Oven

1 Answer

Whirlpool range self cleaning oven door won't unlock after the cleaning cycle was done. gets error code -f5-


I took the back off the stove and manually moved the door locking mechanism to unlock the door. Then started a cleaning cycle untill the door locked. Cancled that cycle and the door unlocked just fine.
Seems OK now.

Oct 15, 2009 | Ovens

2 Answers

Oven lock will not open


my self cleaning oven door will not unlock what do I need to do?

Jan 01, 2009 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Oven wont work after self clean


I have a Whirlpool MOD. RBS275PDB17 single electric self-cleaning oven; although the manual is generic, it specifies, "When the cycle is completed and the oven cools, "End" will appear on the lower oven display and "LOCKED' will disappear" and "To Stop Self-Clean any time: Press UPPER/OFF, LOWER/OFF or OFF/CANCEL. If the oven temperature is too high, the door will remain locked. It will not unlock until the oven cools." Has your oven had time to cool?

Jun 13, 2008 | Whirlpool RBS275PD Electric Single Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

ashburton

Level 3 Expert

417 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...