Question about Panasonic KX TGA270S Cordless Expansion Handset

2 Answers

I have a Pansonic kx-tga270s that is registered to a base I do not have. Is there a way to deregister it.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You dont need to deregister it if you have not registered all 8 hand sets with your base unit. Just register the new one and the base will assign a new # for this new. I you had registered 8 hand sets with your base already, you need to remove(deregister0 one handset from your base(it can take only upt 8).
If it still not registering please deregister as follows:
on the base unit, press program, them mute, then enter 335#, then enter the handset number you wish to deregister.
after deregistering try to register your new hand set.

Posted on Feb 28, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I found I did not have to deregister it. I just went to the new base unit to register it and when I got the Message."move closer to base unit" I hit OK and it registered it.

Posted on Nov 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Unable to change handset registrations from old base to new.


Hello Linda,

See if my FixYa Answer from this previous post helps to Deregister and Register your old handsets to your new base.:

My phone says no link to base but am right beside it

Regards,

-Ellsworth

Mar 25, 2017 | Panasonic KX TG4031 Cordless Phone

1 Answer

Panasonic kx-tg1611 wont register


how i registerd TG1611SP PANSONIC cordless with base and what is HS REGISTRATION and from where i got HS PIN NUMBER

Mar 17, 2013 | Panasonic KX TGA400B Cordless Expansion...

1 Answer

I switched handsets and renamed them, but my calls are still going to my old handset. How do I fix this issue?


You will need to se-register the handsets you are getting rid of...on the base unit go to initial settings-registration-deregister handset. Deregister the handset #'s you are trying to swap (the number is just left of the name on the handset display). Then register the 2 new handsets (on handset: menu-initial settings-regitration) and on base menu #123. Follow instructions on screen to complete registration. This should activate your 2 new hansets and de-commission the old ones.

Sep 25, 2010 | Panasonic KX-TG4500 Phone

1 Answer

Can't register Panasonic KX-TG6051 handset


Press (menu 00, reg) an press locator for 3 secons--- than press ok in you phone.

Aug 01, 2009 | Panasonic KX-TGA600B Cordless Expansion...

2 Answers

My phone says no link to base but I am right beside it.


Sounds like the antenna on the base station is not receiving, or the cordless handset is not transmitting -OR- the sets have never been registered to the base station (please look up registering to base station, if the set has never been registered)

Did the cordless set work before?

The base station or the handset may just have a hick up, I would un-plug the base station and leave it un-plugged... now get all the cordless set(s), and take out the batteries from the cordless set(s). Wait for about 15 seconds for all the power to drain out of the sets, then re-install the batteries.

Once all the cordless sets are back up and working, plug in the base station and wait for about 1 minute.
This forces the base station to re-establish and link between the base station and the cordless sets.

Good luck

May 11, 2009 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Need to clear out a used kx-tga270s handset


press function, initial setting, registration, deregistration, enter 335(deL) and then press Ok (right button on screen).
Once that is done press mute on the base unit and Ok on the hanset (right button on sreen)

Mar 28, 2009 | Panasonic KX TGA270S Cordless Expansion...

3 Answers

How do I add an extension handset to my current config?


IF it was a used handset it was likely registered to another base. I just switched bases (1line to a 2 line base). I had to "deregister" the handsets from the old base. I am not sure if you can deregister if the old base is not present? With the old base plugged into power I hit the "function key" at the bottom left of the handset and scrolled down to initial settings. Under registration is "deregistration". I selected that and it put the handset back to its default out of the box. Then simply hit the mute button on the New base and OK on the handset. Worked for all 5 of my old handsets.

Hope this helps

Jan 27, 2008 | Panasonic KX TGA270S Cordless Expansion...

2 Answers

DeRegistering a Damaged Cordless Phone????!!!!


If you are still looking for an answer on dereg of a handset, the manual says Menu - 0-0-2 then 3-3-5-OK then select the handset you want to cancel/deregister

Nov 05, 2007 | Panasonic KX-TG6074B Phone

6 Answers

DeRegistering a Damaged Cordless Phone???!!!!


I have a Panasonic KX-TG6700 base unit and KX-TGA670B handsets. We had a similar problem where we were no longer able to deregister the handset using the handset itself. We wanted to be able to use that slot that the broken phone was still occupyng. The solution that we found in the manual online was to hold down the intercom button for 3 seconds until the "in use" light turned on. Then press and hold the number of the extension you want to deregister until it beeps. At this point the base unit has freed that extension.

Nov 05, 2007 | Panasonic KX-TGA600B Cordless Expansion...

Not finding what you are looking for?
Panasonic KX TGA270S Cordless Expansion Handset Logo

1,018 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

john milligan

Level 3 Expert

512 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...