Question about Powermatic Masonry Tools

2 Answers

Trying to find a manual for a powermatic 18o planer. NOt having any luck. Thought there was a place on line to down load. HELP!!!

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You may also try Ozarkwoodworker. They have the best manuals I've ever seen on the internet. Here's the one for the Powermatic 180 planer manual.

Posted on Mar 27, 2013

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Try these folks. Ask for Rich Jenkins.

J Redmond Wm And Son Inc 320 Coweta Industrial Parkway, Suites A&B
Newnan, GA 30265

  • (770) 683-7297

Posted on Dec 09, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Powermatic 201 Planer will not start.

I would have to guess the motor has gone to lunch, pull it and test it.

Jan 24, 2017 | Washing Machines

1 Answer

I hav a Powermatic model E16 planer, the motor has been changed to 1 phase 220 amp , the speed sees too slow, what speed should the cutters turn

If it's got the 3-3/4" three-knife cutterhead, it should run pretty near to 5000 RPM. If it's got the 1-7/8" two-knife cutterhead, it should run at nearly 10,000 RPM.

That planer should take a 3600 (3450) RPM motor.

Dec 29, 2013 | Powermatic 1352001 3520B 20x35" Wood...

1 Answer

My powermatic 16 inch planer model 100 planer will not start. I tripped over the chord when it was running and it would not start after that.

when you tripped over the cored you might have broken the connection in the trigger. Take apart the trigger very carefully and make sure that the waires are not broken.

Mar 16, 2011 | Garden

1 Answer

Have Powermatic Planer & can't get the infeed & outfeed rollers adjusted right. Takes all you have to operate it. 24" Planer less than 10 years old & probably doesn't have 200 hours total on...

The rollers may need to be reconditioned. Try cleaning with a solvent to soften them up. I hope this has been helpful please rate if this answer has been of any help. Good Luck and have a great weekend.

Apr 02, 2010 | Powermatic 1791268 201HH 22" Planer w/...

1 Answer

I have a180 880--- planer and realised there are

A lot of equipment is built with sealed bearings these days--just a fact of life. Good luck!

Mar 23, 2010 | Powermatic 1791259/Model 2415 3HP 1Ph 230V...

1 Answer

I want to wire a 3 phase planer up. I have three

install 30 amps 3phase breaker, then wire it up with royal cable 5.5mm x 4wires

Nov 25, 2009 | Powermatic 1791297/Model 209 5HP 3Ph 230V...

1 Answer

Belt for Powermatic 15" Planer (Planer Model M-0460213)

Order the first one through Powermatic, then order any new replacements from the number on the belt. Or you can measure the pulley belt width and use a metal tape measure to find the total length by running the tape (number side in) over each pulley rim. Then order as a standard hardware source belt. Make sure the motor is bolted down about midway in it's mounting slots when measuring.

Sep 07, 2009 | Powermatic 1791210 Model 15S Deluxe Planer

1 Answer

Planar adjustment loose

Well I Researched Your Problem (I'm assuming since you didn't specify, that Your Talking about a Model 15HH?), and Have come up with this, you may want to go to this site, and Check What they have for a Operations Manual.
There's some Great Info in there for Accurate Adjustments of the Machine.
You may choose to use the "Contact Us" on that Page, and Have them assist You.
Hoping this assists you with this Problem.

Dec 26, 2008 | Powermatic 15HH 15" Deluxe Planer w/ Byrd...

Not finding what you are looking for?
Masonry Tools Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Powermatic Masonry Tools Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

ray gallant

Level 3 Expert

47630 Answers

Tom Chichester

Level 3 Expert

37881 Answers

Are you a Powermatic Masonry Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides