Question about Kenmore Elite 45986 Front Load Washer

1 Answer

All lights come on,no response from start button

Posted by on

  • Jane Rains
    Jane Rains May 11, 2010

    It sounds like it is the lock sensors. get your owners manual and look for the troubleshooting guide there should be a combination of buttons you can press to get a diagnostic code to come up on the panel then look up the code. If it comes up with Op or OD that means the lid must be opened or lid must be closed either way the lock sensors are not responding and that would be the problem. Hope this helped

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Is the door locked ???? if so, try pushing both on/off button and cancel button, hold for 30 seconds.

Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MF4150-All Panel lights remain ON and no response with any other button on display and Start and Stop/Reset button light also remains ON.


Support ' Support Laser Printers - imageCLASS ... - Canon

https://www.usa.canon.com/.../printers/...laser-printers-imagec...

Canon Inc.The imageCLASS MF8380Cdw delivers fast and accurate printing in approximately 14.3 seconds with Canon's Quick First Print Technology. Multi-page ...Missing: mf4150 ‎panel ‎remain ‎response

Amazon.com: Customer Questions & Answers

www.amazon.com/ask/questions/asin/B000J4J70Q

Amazon.com, Inc.Canon imageCLASS MF4150 Laser Duplex P/s/c/f 21PPM Adf ... make a two side

Feb 05, 2016 | Canon imageCLASS MF4150 All-In-One Laser...

1 Answer

Dishwasher won't run


It is the touchpad that is faulty.. coz if the control board is faulty the unit may not respond to any button at all.. So just get a new touch pad.. If you want to buy it online.. then let me knnow i will get you the link..

Mar 13, 2008 | Kenmore 16372 / 16374 / 16379 Built-in...

1 Answer

My wac 7500 has power but wont light up or start. None of the buttons have any response including the power button.


Check the power supply for a faulty transistor with a digital multi meter. Carefull if you are to do live voltage test/

Jan 19, 2015 | Audio Players & Recorders

1 Answer

LG WM3455H won't turn on.


Unplugging to reset only works when the washer has power and on stand by. Start by checking the fuse on the noise filter, that is were the power cord connects to. If good than your main board is bad.

Apr 06, 2014 | LG Front Load Washer / Dryer Combo...

1 Answer

No response to Start button, battery is good, no signal lights


Hi Anonymous, check fuses and circuit breakers, check countinuity at start button and ignition switch. Good luck

Jan 02, 2014 | Harley Davidson FLSTC Heritage Softail...

1 Answer

I have a 98 bmw 318ti and the tach,speedo, fuel guage and temp guage stopped working all the dummy lights work (check eng, seatbelt etc) any suggestions??


there are buttons are not working, the first one which is responsible to operate the four lights togather ( flasher lights ) . the second buttong is responsible to lock the doors . boh of these buttons are located beside the gear stick.

Dec 28, 2010 | 1999 BMW 318 ti

1 Answer

I washed my V-Strom 650 yesterday and now it won't start. Lights, gauges react to key, fuses all seem fine, however, I get no response from start button. Lights dim when I push start button and that's...


It's probably just the the clutch ignition wiring clip located directly underneath the clutch lever. It seems to come unplugged fairly easily. I had the exact same problem and this was the quick fix.

May 04, 2010 | 2006 Suzuki DL 650 V-Strom

1 Answer

Dell x50v won't turn on


while pushing the power button , push reset button for couple of seconds. hope that helps as that is what worked with mine.

Jun 11, 2009 | Dell Axim X50v Pocket PC

1 Answer

Sanyo Dvd player is not responsive to any buttons, "Disc in" and "Play" light are contantly on, and well as the power button which is not responsive and the eject button is not...


Try unplugging it from the wall for a minute, then see if it works. If not, it's probably a power supply problem inside the unit.

Hope that helps

Geno

Aug 01, 2008 | Televison & Video

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...