Question about Linksys WRT300N Wireless Router

1 Answer

Hi there, my router has all its lights on with only the power cable connectedmodel is linksys wrt300n

Posted by on

  • charlie_robi Nov 19, 2009

    unplugging, reseting and all the simple solutions have been tried with no success

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 83 Answers

Switch off the rotuer and plug out the cables and reconnect them again and turn on the router and then check. OR reset the router and reconfigure it again.

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Linksys WRT300N router will not show up on my network. Also the power light will not stop blinking no mattter what reset trick , option, whatever I try to do.


When the power light keeps blinking that means your firmware may be corrupt. Follow the directions on this link and it should solve your problem hopefully.

http://www6.nohold.net/Cisco2/GetArticle.aspx?docid=bdb4a0a3a85e49efb91cedc21241e779_3735.xml&pid=80&converted=0

Mar 19, 2011 | Linksys WRT300N Wireless Router

1 Answer

Power light is dim and the 4 ethernet connection lights are bright green - even without a cable plugged in to them... removing power for more than 60 seconds and even hold ing the reset button for more...


I found this somewhere else but can't find it now - my router got hit by a power surge - i held in the reset button for 60 seconds with the power connected and it sluggishly decided to come back to life. WRT300n V1.1 - your results may vary.

Nov 07, 2010 | Linksys WRT300N Wireless Router

1 Answer

My WRT300N Linksys router shows all lights, I've hit the reset button onece, but I can not get online without plugging the cable directly into my computer.


Since you hit the reset button on the router, it will go back to default settings.

By default, the SSID is linksys and the wireless security is disabled.

So on the wireless network connections on your computer, you should see linksys and then just connect to it.

However, it is advisable to change the default SSID and to enable the wireless security.

Follow this link to change the SSID.
Follow this link to enable wireless security.

Good luck!

Dec 30, 2009 | Linksys WRT300N Wireless Router

1 Answer

I just rewired all my network connections, my wrt300n wireless indicator is not lit. The network is set up on a linksys broadband router on a cable modem and wrt300n was functioning properly when it was...


Try first resetting the router by pressing the reset button of the router fro 10 seconds while power is ON and then after that reconfigure the router.....

Dec 07, 2009 | Linksys WRT300N Wireless Router

1 Answer

My wrt300n power led is blinking and the rest of


Hi Friend
Please follow the steps to reset the router in a different way

1) Press the reset button for 10 secs and after that unplug the power cable from the router and wait for 10 secs
2) Plug the power cable back and press the reset button again for 10 secs and after that unplug the power cable from the router and wait for 10 secs
3) Plug the power cable back and press the power button for 10 secs again and unplug the power cable from the router for 10 secs

After trying these steps if you see the power light still blinking then you need to replace the router. Please call the customer care of linksys 1800 546 5797,they will let you know how to replace the router

warm regards

Chiranjeet Mitra

Oct 06, 2009 | Linksys WRT300N Wireless Router

1 Answer

WRT300N is no longer detected


Hook up your ether cable to a port other than the WAN port.

Type this into a browser...

http://192.168.1.1

Linksys WRT300N Wireless Router. ... Default IP address: 192.168.1.1

Oct 01, 2009 | Linksys WRT300N Wireless Router

1 Answer

WRT300N dosnt connect


if your connection (isp) is CABLE you will need to clone the mac of the main computer.

For cable connection verify what computer can go online with your modem, once you know the main pc connect it to port one, access the routers setup page by typing 192.169.1.1 then locate MAC ADDRESS CLONE in line with basic setup. enable it click the macclone button then save settings.
connect your modem to the internet port on the router, do a power cycle on the modem and router.
then check the status tab on the linksys setup page if you have numbers on the dns it should be online.


Sep 12, 2008 | Linksys WRT300N Wireless Router

Not finding what you are looking for?
Linksys WRT300N Wireless Router Logo

Related Topics:

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...