Question about Kenmore 24032\24036 Top Load Washer

1 Answer

My kenmore washer 80 series model 110.23832100 won't spin. I think that is the switch lid. How can i replace it

Posted by on

  • rjhahn May 11, 2010

    Motor clutch

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,937 Answers

First, see the Sears parts site for your washer.

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?pop=true&modelNumber=110.23832100


The Kenmore / Whirlpool top load uses a reversing motor to initiate the pump for draining and the transmission to spin.

If you cannot hear the motor trying to turn the pump, (but the washer will agitate) the problem points to the Timer, or the Lid Switch.

Try to bypass the Lid Switch by removing the Console and jumping the two outermost pins on the switch.

Following is an illustrated guide for how to access the console.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131&osCsid=5f1af8349a77f9dc5632b02160e0d6c6

This is the Whirlpool PDF on installation and maintenance of direct drive washers. See the section on how to bypass the lid switch and on the transmission.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

If the washer will drain but not spin the problem points to the Neutral Drain Assembly in the transmission.

The Whirlpool PDF has a very good explanation of how the assembly works.

Ours had the same problem, no draining or spinning unless the washer was stopped and restarted.

We replaced the neutral Drain Assembly for about $15 vs. $170 for a transmission.

If the Lid Switch is OK, please re-post a request for how to replace the neutral assembly.




Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Washer 70 series Model #110.22722100 won't spin


Check door switch: If the lid switch is bad it will not drain or spin. Try this test: With lid open let it finish wash cycle. Press lid switch down with screwdriver. Washer should begin draining. Release switch. Motor should stop. Press switch a second time. Washer should start spinning as it continues to drain. If motor doesn't come on while lid switch is pressed, replace the switch. OR
http://www.youtube.com/watch?v=q942xn_2VXY
Click if helped.

Feb 25, 2013 | Washing Machines

1 Answer

My kenmore ad 80 series washing machine won't spin


The lid switch is probably out. Bypass it and see if she magically comes to life. Their are 3 wires to the lid switch 2 of which are live wires. Jumper them 2 live wires and see if she runs in spin.

My home video: Washer won't spin It's a doozy

Jul 20, 2012 | Kenmore Washing Machines

1 Answer

Kenmore 80 series washer, replaced lid switch already, will fill, wash (agitate) but stops before draining and spinning and will not run. Is the timer the next step for replacement? Model: 110.29852991


First check the continuity of the wires in the lid switch and the switch itself. Make a jumper wire to attach to the lid switch connector on the washer cabinet and set it to spin. If still no spin,replace the timer.

Aug 14, 2009 | Kenmore Washing Machines

1 Answer

I have a series 80 top loader. It filled and


Screws holding the lid switch was broken. Had to replace lid switch.

Jun 11, 2009 | Kenmore 24902 Top Load Washer

1 Answer

Kenmore washing machine 80 Series 110 20802 990 Will not agitate or spin"


You need to replace the Kenmore Washer Lid Switch. I had the same problem so being lazy I would just push down on the washer's lid and it would push the lid switch further down. making the water drain. after a while I just replaced the lid switch.

Apr 22, 2009 | Washing Machines

1 Answer

Kenmore 80 series washer not spinning/draining


The lid switch is failed.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 17, 2009 | Kenmore Washing Machines

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

1,184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2333 Answers

fordexpert

Level 3 Expert

5546 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...