Question about Samsung NC10-14GW Notebook

1 Answer

I have a samsung nc10, just downloaded blackberry desktop manager, tried syncronising my media and an error message came up stating "change the screen resolution to 1024 x 768 pixels or higher". This laptop will only support 1024 x 600!! how do i upgrade????????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 40 Answers

Every monitor and TFT's have maximum limit of changing resolutions, and if your laptop not support more than 1024 x 600 then it is not possible to change it for more high, it can be the problem of your video driver, first you should reduce your refresh rate to minimum, then see that it shows the resolution of above 1025x600 or not. If it is not shows then you have to download latest video driver for your laptop. Go to RUN type DXDIAG and click on Display tab you will see what your chipset is..then go to Intel.com then download a video driver of your required chipset then try. Good Luck
Hope the problem will solve..

Posted on Nov 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I get an "Error 513"


Here is some good info:

heck below steps for OS upgrade -
Step #1
Before starting make sure you have BlackBerry Desktop Software installed on the computer.

Step#2
Make sure that you have installed updated device OS is installed in your PC. Check this link to get update device software from carrier OS download site:


http://na.blackberry.com/eng/support/downloads/download_sites.jsp


Step#3
Users can perform a full or selective backup of the data using the Backup and Restore apps in BlackBerry Desktop Manager by completing the following steps:


  1. Connect the BlackBerry device to the computer
  2. Open BlackBerry Desktop Manager
  3. Open Backup and Restore
  4. Select Backup to perform a full backup or select Advanced to perform a backup of specific databases.
  5. Choose a location to save the backup file, then click Save.
Step#4
To perform a clean install of the BlackBerry Device Software, perform the following steps:
  1. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager
  2. Open the Application Loader it will prompt if there is any new/updated OS is available
  3. Click Next to start the installation process
  4. Type your BlackBerry smartphone password, if prompted, and click OK
  5. Click the check boxes next to the names of the applications you want to load, and then click Next.
  6. When the process has completed, the message The loading operation was successful will appear.
  7. Click Close to return to BlackBerry Desktop Manager.



http://supportforums.blackberry.com/t5/BlackBerry-Curve/quot-JVM-Error-513-Reset-quot/td-p/590718#M70865


Post again if you need further assistance and good luck!!

Just to give you another option, try this if you would like:

-------------------------------------------------------------------------------------------------------------------------------------


Ok, you may lose your data, but try this first to see if you can load the opertaing system without losing your data.

See the link below, for the download and simple installation instructions.

First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp

Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.

1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.


Thanks!!

Jun 28, 2011 | RIM BlackBerry Bold 9000 Smartphone

1 Answer

I get the message Uncaught exception: DSSMA: invalid state (5):10060 everytime I try to get my messages


Hi, When the BlackBerry smartphone user attempts to access or open the messages folder from the Home screen, the Uncaught Exception: DSSMA Invalid state error message is displayed. To resolve this error, you need to perform a hard reset of the BlackBerry smartphone. If you face the same error even after performing a hard reset of the BlackBerry smartphone, you need to complete the following steps: 1. Back up the BlackBerry smartphone using BlackBerry Desktop Manager. Erase all data and applications from the BlackBerry smartphone. Restore the backup of the BlackBerry smartphone using BlackBerry Desktop Manager. Hope I helped you. Thank you for using ' Fixya ' and have a nice day!!

Nov 18, 2009 | RIM BlackBerry 8800

2 Answers

App error 523


On the BlackBerry smartphone, the following error message appears after pressing the mute button, accessing an application, or performing a hard reset:
523 app. error. Reset.

To resolve this issue, the BlackBerry Device software will have to be reloaded.

Note: The BlackBerry smartphone will not show a Connected state in the BlackBerry Desktop Manager. Please proceed to open and run the Application Loader.

Jun 29, 2009 | RIM Blackberry 8310 8320 8330 Curve 8100...

1 Answer

My PC does not find my Blackberry Pearl. I'm trying to download some music to the device to listen as an MP3.


to do so you will have to download the Blackberry Desktop Manager with media manager

https://www.blackberry.com/Downloads/browseSoftware.do;jsessionid=VjdY-jJYDP6kC4XecJSylg**


this will take you to the blackberry download page for desktop manager with media manager.
download and install it.
then plug your phone in via usb cord and will initialize.
in the desktop manager click on media manger and add pics, music and videos.

May 13, 2009 | RIM BlackBerry Pearl 8100

1 Answer

Reload software 513 error


After typing an incorrect password ten times and restarting the BlackBerry smartphone, the following error appears:JVM 513
All of the data and applications on the BlackBerry smartphone have been deleted and The BlackBerry® Device Software must be reloaded on to the BlackBerry smartphone (Due to the Java Virtual Machine (JVM) error, the BlackBerry smartphone will not show a Connected state in the BlackBerry® Desktop Manager. Proceed to reload the BlackBerry Device Software using the Application Loader)
To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 and 4.6, perform the following steps:
1) Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
2) Double-click Application Loader.
3) Click Add/Remove Applications.
4) Type your BlackBerry smartphone password and click OK.
5) Select the check boxes next to the names of the applications you want to load.
6) Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications.
7) Click OK.
8) Click Next > Finish
9) When the process has completed, the message The loading operation was successful will appear. Click Main Menu to return to BlackBerry Desktop Manager.

Apr 10, 2009 | RIM BlackBerry Pearl Flip 8220 Cellular...

1 Answer

I JUST BOUGHT A BLACKBERRY CURVE 8310. I'VE TRIED DOZENS OF TIMES TO DOWNLOAD ISILO TO DESKTOP MANAGER BUT I CONTINUE RECEIVING ERROR MESSAGES. I EXTRACTED ALL THE FILES IN THE FOLDER iSilo505BBJAD AND...


Hey there,

I guess you have newarly solved your problem.

So, install the latest Device software first using the Desktop Manager. Also Double check the Device Manager version - Make sure it's the latet version - if it's old then un-install it and install the new one.

So once you have the Phone software and the latest Device Manager, plug your Device in and use the Desktop Manager - Application Manager to install the ISILO software. Im not sure what ISILO is but if that application is compatible it will install smoothly.

Give it a go and let me know how it works,

Cheers.

Mar 11, 2009 | AT&T BlackBerry Curve 8310 Cell Phone -...

1 Answer

Language will not stay on English (United States)


Hi,
You'll need to download and install Desktop Manager 4.2 SP1 and the 8300 Firmware.  Once you download and install them, run Desktop manager with your BlackBerry connected, then run the Application Loader.  You'll be able to add the Language modules from there after which you should be able to change it on the BlackBerry.

Hope this helps. Please Rate My Response! Thanks!

Prem

Feb 19, 2009 | AT&T Blackberry Curve 8300 Smartphone

1 Answer

Blackberry Curve & Outlook 2007


I've had a few clients with this issue. I have used these steps from RIM. Try it and see if it helps.

Here’s what you need to do:
1. Uninstall Desktop Manager
2. Remove any references on your registry and on your C drive program files and users to:
a. Blackberry
b. Pumatech
c. Research in Motion
d. RIM
e. Desktop Manager
3. Disable the UAC (User Accounts) on Control Panel-Users
4. Get a command prompt and type regsvr32 atl.dll (enter)
5. Reboot
6. Make sure that when you re-install you have absolutely no SpyBot, Virus, Spam guard or the like running.
7. Reinstall Desktop Manager (version 4.2 SP2)
8. If you get an “Error 1904….Lotus Notes…” Ignore it
9. After you do all this, it should work

Jan 10, 2009 | AT&T Blackberry Curve 8300 Smartphone

1 Answer

Blackberry Curve & Outlook 2007


To get rid of the unknown error, you will need to uninstall the Blackberry Desktop software. When you do this, make sure that you have the uninstaller delete the user settings, too. Then reinstall Desktop Manager 4.3. See if that helps with the syncing, too. This solution solved the error problem for me, so I hope it will work for you.

If this does not solve the syncing problem, then post back here again and we'll look for another solution. Sometimes a .pst file repair will help.

Jun 04, 2008 | AT&T Blackberry Curve 8300 Smartphone

Not finding what you are looking for?
Samsung NC10-14GW Notebook Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

kakima

Level 3 Expert

102366 Answers

phoenix chi
phoenix chi

Level 2 Expert

389 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...