Question about Pioneer inno2 Portable XM Satellite Radio Receiver with Home Kit - Black

Open Question

Pioneer inno 2 will not power on or charge

My Pioneer inno 2 will not power on. I put it in the cradle, the please wait screen comes on, but then goes black. This cycle will continue and battery will not charge

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: pioneer inno

I have the same issue. I was told a firmware upgrade will fix this issue

Posted on May 29, 2007

SOURCE: battery life

I know exactly what your talking about, I phoned the company and got the run around, somebody, anybody please help if they can!

Posted on Sep 18, 2007

  • 1 Answer

SOURCE: Pioneer Inno Gex-INNO2BK stuck in re-boot cycle

I fixed the reboot cycleing problem by plugging the travel charger into the jack that also fits the home and car cradle. I had the Inno set to auto start when it was powered on in the car cradle. The travel plug must have over-ridden the auto-start setting and allowed it to finish the complete bootup. I then reset the Inno default settings and every thing was back to normal. I do not know what was the original cause of the rebooting cycle problem

Posted on Jul 28, 2008

  • 1 Answer

SOURCE: Pioneer Inno shows loading

Not any more help here than with Pioneer. Not sure satellite radio is the way to go if you have to replace the radio very couple of years!

Posted on Nov 04, 2008

  • 2 Answers

SOURCE: pioneer inno

The problem is caused by a glitch in the firmware that came on your Inno. It can be easily fixed by downloading a free firmware update at http://fwupdt.xmradio.com.

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does pioneer have a car cradle for the inno2 that secures it better i have gone through so many of them and now my warranty is up. i operate heavy equipment and it causes my inno to fly out of the cradle,...


I feel your pain. Unfortunately, I haven't been able to find any car docks, there all discontinued. (sorry bums!)
But, when I'm riding my motorcycle, I put a rubber band around the radio and dock, holding it in place.
But, in a place that doesn't interfere with any buttons or the display.

Jun 06, 2010 | Pioneer inno2 Portable XM Satellite Radio...

1 Answer

Unit will not power on all of a a sudden always have it placed in cradle when playing otherwise charging


called the techinical staff of the manufacturer, Pioneer, who diagnosed the problem with me over the phone. there was no charge for their services. the person I spoke with resolved all issues within 5 minutes.

Sep 09, 2009 | Pioneer XM2go Inno Satellite Radio...

2 Answers

White screen


I had the same problem with my Pioneer Inno Gex-Inno2BK XM radio receiver. One evening while leaving work, I gently took it out of the cradle & the screen suddenly went completely blank & all white. I could still hear music but there was no screen visible. Solution is this: (1) Gently remove the back cover which covers the battery. (2) Gently remove the dark blue square battery which is only about 1 inch (width) by 3/4 inch (height) by 1/4 of an inch in thickness. I removed mine by holding the receiver upside down & gently shaking it with one hand until the battery came out into my other hand. After about 4 or 5 gentle shakes, it came out. (3) Wait about 10 seconds. (4) Place battery back into XM radio receiver being careful to line the copper power receptable on the battery with a corresponding surface inside the receiver. Each copper area is only about 1/10 of an inch by 1/10 of an inch. Use this as a guide when putting the battery back in to make sure it's lined up properly. (5) Gently slide the cover back in place & let it snap into place. (6) Turn receiver back on by pushing power button like normal. (7) XM receiver should boot up with a full display just like new. All recorded songs are still in place. Nothing has been lost. Problem solved. Root cause of problem is probably some type of boot-up issue with the receiver in which the battery (i.e., the power supply) just happened to be slightly ajar...which also persisted even when placing the receiver back in the cradle until the above steps were taken. The steps above worked beautifully for me...Hope it works for you as well! Have A Great Day...Tom Armstrong

Jan 19, 2009 | Pioneer inno2 Portable XM Satellite Radio...

1 Answer

Screen won't flip when in the cradle


Take it back the store where you bought it at. It sounds like a broken system?

Jan 09, 2009 | Pioneer inno2 Portable XM Satellite Radio...

1 Answer

Pioneer inno radio-doesn't work in car


When its in the car dock, the Inno sends an FM signal to the car radio. It does not receive a signal from the car radio. You must have the external antenna correctly installed outside the vehicle for the Inno to work. The built in antenna is disabled when the device is placed in the car dock. Make sure to test it outside, since garages or car ports will block the signal.

Dec 03, 2008 | Pioneer XM2go Inno Satellite Radio...

2 Answers

BRAND NEW BUT NO DISPLAY


I also had the white screen / blank screen problem on my Inno today.  I powered the unit off, removed it from the home cradle, and then popped out the battery for about 15 seconds and put it back in.  This fixed the problem.

Sep 13, 2008 | Pioneer XM2go Inno Satellite Radio...

1 Answer

Pioneer Inno Gex-INNO2BK stuck in re-boot cycle


I fixed the reboot cycleing problem by plugging the travel charger into the jack that also fits the home and car cradle. I had the Inno set to auto start when it was powered on in the car cradle. The travel plug must have over-ridden the auto-start setting and allowed it to finish the complete bootup. I then reset the Inno default settings and every thing was back to normal. I do not know what was the original cause of the rebooting cycle problem

Jul 28, 2008 | Pioneer inno2 Portable XM Satellite Radio...

4 Answers

Pioneer Inno FM modulator


Make sure it is docked in the docking cradle for the car. The option will not come up if the unit is not in the docking cradle.

Apr 15, 2008 | Pioneer XM2go Inno Satellite Radio...

Not finding what you are looking for?
Pioneer inno2 Portable XM Satellite Radio Receiver with Home Kit - Black Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

John
John

Level 2 Expert

509 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...