Question about Projection Televisions

1 Answer

Kp-41t15 my sony televesion is complety dead where do i start checking my email is

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers
Re: kp-41t15

The general strategy is to unload the power supply until it comes up. Then fix or replace that circuit. If you can figure out which cable runs power to the convergence circuit - try that first. Also try disconnecting the CRT anode leads one at a time (if that does it then you got a bad CRT). If still no nada, then get a schematic and dive into the power supply board

Posted on Jan 11, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sony KP-41T15

It should as Sony usually have very thorough service manuals

Jan 16, 2009 | Projection Televisions

1 Answer

Sony KP-41T15

I just called over there to speak with sonnt who said check the following fusible resistors on the D Board R1643,R1644,R1645, R1646,R1647,and R1648. They blow fastr when you have a convergence issue. There are all 0.1 ohm 1/6 watt resistors.
Also he mentioned they do have the manual its just not listed, but if you email them they will list it for you.

Jan 16, 2009 | Projection Televisions

2 Answers

Convergence Problem

most likely cause is one of the 3.5 amp picos have blown when the old Ics failed. You can get replacement picos at the following link, and they also have the service manual which will explain how to adjust the colors through the service manual. Here is the link.

Jan 15, 2009 | Sony KP-41T65 41" Rear Projection...

1 Answer

Tv problem

Many of these Sonys can be repaired simply by reseting the white balance for the CRT's

Oct 12, 2008 | Sony KP-57HW40 57" Rear Projection...

2 Answers

I need a blue picture tube re-necked / rebuilt

Go to the following link and leave your model number in a email and list which tube you need, they have access to just about any new replacement tube that you need for Sonys. they dont list them all, but leave a email I am sure they will have what you need.Heres the link.

Aug 09, 2008 | Sony KP-65WV700 65" Rear Projection HDTV

1 Answer

Televesion parts

we will need 3 months to explain all this
lets start with the flyback
this trasnformer provide from 25000 volts to 40000 to the crt on some tvs 3 crt

Aug 08, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Same problem

if the tv show bad converg or bad colors it may need the stk ic

Jul 06, 2008 | Sony KP-53HS30 53" Rear Projection...

1 Answer

Sony blinking standby light

That means current overload transistor Q5001 or Q5201 is shorted on the D board and must be changed

Apr 22, 2008 | Sony KP-57WS520 57" Rear Projection...

2 Answers

Sony kp-51hw40

Bad blue CRT................common problem.............T.

Dec 02, 2007 | Sony KP-51HW40 51" Rear Projection...

6 Answers

Sony KP-FX432M91 TV 10 blinks

my sony kp-fx432m91 has a 10 blinks problem. it has no pictures but has sound that goes off after 5 seconds please advice on what to do.

my email address is

Oct 31, 2007 | Sony KP-FX532M91 TV

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

57192 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides