Question about Dishwashers

1 Answer

Diplomat Dishwasher motor cutting out on hot mid cycle

I have an integtated Diplomat Dishwasher dont know the model number off hand but it is a basic one with 3 wash selections of 40-50-and-70deg wash and a on/off button, the problem is when after it has finished its first cold cycle and is halfway through the main wash hot cycle, it will be working fine then the motor will start cutting out,or ''stuttering'' at this point the m/c has to be turned off until it has cooled down then it can be re-started to finish the cycle which it mostly does without a problem, The washer was cutting out like this when it was new and we were advised that the waste pipe has not to go along the floor which we adjusted as in the manual and had no more problems, this is not the cause this time, also the m/c does not cut out when doing the 30min quick/cool/wash......please advise..

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi ,This problem is your main wash motor the origonal is an ascol
motor ,but the replacement is a motor with copasiter costs
around £80.00 for new motor

Posted on Dec 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diplomat dishwasher


It is likely the door switch is faulty and not letting the dishwasher start the cycle. Need to have the full model number and make of dishwasher to advise further.

Apr 11, 2014 | Dishwashers

1 Answer

Kitchenaid dishwasher wont stay closed


you might need a new Latch, Drawer (left Hand) part number 8194053 okay

Feb 07, 2013 | KitchenAid 23 in. KUDD01DPPA Stainless...

1 Answer

Diplomat Dishwasher Power going off and on


if you are looking for the answers related to your dishwashers problem then you gotta check out this link it's nice and simple easy solutions can solve your problems in just few minutes..
Check them here : Bosch Dishwasher Error Codes E15 E22 E01 E09 Error Codes Pro

Mar 30, 2017 | Dishwashers

1 Answer

Diplomat Dishwasher ADP8352 Will not complete wash Cycle


My Diplomat ADP8352 when running a cycle it will run for ages, doesn't seem to get hot. If i switch off the m/c then switch it on again it dumps the water left in the m/c?

any ideas?

Jan 04, 2009 | Hotpoint 18 in. DC28 Slim-Line Built-in...

2 Answers

Danby dishwasher E3 error


Same issue here so I just got off the phone with Danby. They said the E3 means the water is not hot enough when it goes into the machine. Now I dont know your guys situation but I let the water run hot until I cant touch it anymore, then I turn on the machine and plug it in. So it sounds like the heating mechanism is not working properly and does not heat the water to the appropriate temp to continue with the cycle. I will say that their support was really friendly and she informed me that since it was purchased less than a year ago it would be covered under the warranty. She gave me the number of a local repair shop. Lets just hope they dont tell me nothing is wrong with it because my water temp is fine. I will let ya guys know. Here is the number for Danby that I called. General office: 419-425-5052. Good Luck!

Jul 21, 2008 | Dishwashers

2 Answers

Diplomat Dishwasher Model ADP 8132


Please can you give me the dimentions of this Dishwasher Diplomat Model ADP 8132, as I have got to get a replacement and have been told that the Hotpoint FDL570X is the replacement offered,Many Thanks,

Mar 28, 2008 | Dishwashers

1 Answer

My diplomat dishwasher keeps stuttering mid cycle


Did you find the cause of your dishwasher problems?

Mar 12, 2008 | Dishwashers

1 Answer

Diplomat dishwasher blows fuses


I would disconnect the heater then run the unit.If it runs the heater is bad,if the fuse blows again the motor is most likley bad.make sure there are no water leaks.let me know.happy holidays

Dec 05, 2007 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Owen Barnes

Level 3 Expert

867 Answers

Brad Brown

Level 3 Expert

15633 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...