Question about Philips Magnavox 51MP392H Rear Projection Television

1 Answer

Phillips 55PP9363H/17 needs convergence repair part numbers

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Philips Master
  • 14,553 Answers

This model uses two of the STK-392-120 CONVERGENCE IC chips. If convergence is skewed or will not adjust both of them along with any of the 6.8 ohm resistors that protect them need to be replaced.

Then you take the set into the convergence TECH mode and adjust it for picture in first the non and then in the HD mode if it has it.

You can buy the chips on Ebay for less than 13 dollars plus shipping for a pair-the resistors can be purchased at most electronics stores and are easy to check-any that are discolored or have NO reading across them need to be replaced along with both chips.

I can give you specific instructions about doing this repair. The hard part of the repair is getting at the chips to unsolder them and then replace them.


I can tell you where on Ebay to buy the chips for the best price--I am willing to help you if you have problems doing the repair---all of this presumes you know how to solder and unsolder etc.

BY THE WAY, MOST OF THE SITES ON THE NET THAT SELL KITS FOR THIS TYPE OF REPAIR ARE A WASTE OF MONEY-MOST OF THE PARTS ARE NOT NEEDED--save yourself some money and do it the right way.


If you want my instructions and have any questions, rate this solution as I do this here for FREE.

Thank you for using FIXYA.

SD TECH

Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello I have a 55" phillips 55pp9363h/17.When I tried to turn my tv on it won't turn on and the TV is making a high pitch beeping sound what might I do to fix this.I was just watching the TV 20 min ago.It...


The high pitched sound means there is a short on the Deflection board which is the middle board. Most likely it is a shorted transistor or capacitor on that board. Not a do it yourself fix. Someone needs to get the chassis into the service position and check for shorted parts on that board.

Let me know if you have questions.

SD TECH

Oct 02, 2010 | Philips 55P8241 55" Rear Projection...

1 Answer

Bulb out in a Phillips model #55PP9363H/17


you can get a bulb at ( discount-merchant.com) these guys are pretty good as far as availability. prices are also reasonable.

Mar 29, 2010 | Philips 55PP9363 55" Rear Projection...

1 Answer

Picture is doubled and multi-color


Projection TV sets have two very common problems listed below.

Problem #1) Convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 20, 2009 | Philips 55PP9363 55" Rear Projection...

2 Answers

My phillips 60 in projection tv is showing to


The two convergence ICs and 12 feed resistors are the most likliest cause. Whats your model number as you can get convergence repair kits which have parts and CD with instructions at www.tvrepairworld.com

Jul 16, 2009 | Televison & Video

1 Answer

PHILIPS 60PP9202/17F convergence is out. The image is bowed and dull, need help. What part number do i need?


You can get the repair kit at the following link. This kit contains both of the STK392-120 ICs and all 12 of the feed resistors, plus step by step instructions with pics. http://servicemanuals.vstore.ca/product_info.php/pName/phillips-dptv-305-dptv345-convergence-repair-kit/cName/convergence-repair-kits

Jun 07, 2009 | Televison & Video

1 Answer

Magnavox 51mp3964h/17 has 3d effect


You can get the repair kit at the following link to reapair the convergence issue. The kit contains the two Convergence IC and the 12 resistors plus step by step instructions how to do the repair. Heres the link for the correct kit for your model which is the Mag 01 chassis.
http://servicemanuals.vstore.ca/product_info.php/pName/phillips-dptv-305-dptv345-convergence-repair-kit/cName/convergence-repair-kits

Jun 01, 2009 | Televison & Video

1 Answer

Craked screen


You can find a new OEM Philips replacement lenticular screen and Fresnal screen for a model # 55PP9363H17 from a major Philips distributor at the following links:

Philips 55PP9363H/17 Replacement Part Lenticular Screen

Philips 55PP9363H/17 Replacement Part Fresnal Screen

And here's a link for the protection screen if needed:

Philips 55PP9363H/17 Replacement Part Protection Screen

Apr 02, 2009 | Philips 55PP9363 55" Rear Projection...

2 Answers

Convergence trouble philips mod 51pp9303h/17


You can get a convergence kit with a photo instuction guide from www.TvRepairKits.com. The kit is for your exact model and includes the 6.8 ohm resistors.

Dec 07, 2008 | Philips 55PW9363 55" Rear Projection...

1 Answer

Phillips 60PP9363H/17 Picure warped and collor drifting


You have a convergence chip problem. You need to get a kit from www.TvRepairKits.com.

Note: The longer you run your set with a convergence problem the more problems you will have. Turn it off and get it fixed. 

Nov 14, 2008 | Philips 60PP9363 60" Rear Projection...

1 Answer

I have projection TV 55PP9363H/17 SOUND NO PICTURE.


check the horizontal output transistor, it could be open.

Jun 19, 2007 | Philips 60PP9352 60" Rear Projection...

Not finding what you are looking for?
Philips Magnavox 51MP392H Rear Projection Television Logo

Related Topics:

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...