Question about NetGear WGR614 Wireless Router

1 Answer

Set up with Mac G-5 and RCA by Thomson digital Broadband modem will not connect through Netger WGr614 Wireless Router

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Contributor
  • 62 Answers

For Set-Up Procedure follow these steps:-
1)Connect the Modem to the Internet port of the NETGEAR router and the computer to any of the four LAN ports.
2)Open an Internet Explorer browser and type the router IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Ente
The Login window will prompt for the router configuration username and password.
The default username is “admin” and
the default password is “password”
3)Click Setup Wizard on the top left corner, Select Yes for the Setup Wizard to detect the type of internet connection and click Next.
4)The Setup Wizard will detect the type of Internet connection. For Cable Internet connections, Setup Wizard will detect Dynamic IP. Click Next
5)You do not have to change the default settings unless your ISP has given you specific DNS information which must be configured so smiply without changing anything click apply.
6)The router will now save these settings. When complete, you can verify whether you are connected to the internet from the Router Status > Maintenance menu.
7)Under Router Status you will have Internet Port , If you have the Ip Address Under Internet port you will have the wired connectivity then.

Link:-http://kb.netgear.com/app/answers/detail/a_id/119

Wireless Connectivity Steps:-
On the left hand side you will have the blue/purple column in their under the category you set-up you will see a sub-title wireless setting's, left click on that option and then do the setting's.This link will guide you how to do that:-
http://kb.netgear.com/app/answers/detail/a_id/112/related/1

Steps for Wireless Connectivity on MAC:-
1)Click on the apple icon on the left hand side of the start screen and go to system preferences.
2)Under system preferences a category name internet and network select the title network from there.
3)Under Network you will have an option for airport to turn it ON so do that and then below you will see list of networks available , from that list select the network you created , enter the password if it's secure one and you will be good to go from ther on and will have an internet access.

Posted on Nov 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect a rca thomson router to wifi


You are trying to connect to a modem, not a router, the router, a wi-fi version, is what you are connecting to your network.
First, power off all equipment, computer and modem, use the network cable you have connected to your computer from this modem and disconnect from the computer, connect it to the differently colored port on one end of the Belkin, the others have numbers, connect a network cable from one of the numbered ports to the computer.
Now power on the RCA modem, wait until lights are steady, then turn on the new Belkin router, wait until lights are active, just a few moments, then power on your computer, you should now have internet access and be able to locate the manual from the Belkin's website to further your setting up a passphrase or setting up some security on your wi-fi.

Jun 14, 2014 | Thomson Rca / Digital Broadband Modem...

1 Answer

How to setup a rca thomson digital broadband to a tm router


You have to reboot your modem anytime you connect a new device to it, this is what is great about routers! They act as the reference device to your modem since the modem can only "pair" with 1 mac address at a time, this allows you to connect and disconnect devices to your internet without having to reboot your modem and to also have multiple device use the same internet service at the same time.
Unplug the power to your modem and just follow the directions that came with your router on how to wire it to your modem and set it up. Once you are done plug your modem back into power and you should be up and running.

Jan 31, 2013 | Thomson Rca / Digital Broadband Modem...

1 Answer

How can i connect my RCA by Thomson digital broadband cable modem it is DCM425 to a belkin router to make a wifi connection?


Plug the Ethernet cable into the yellow jack on the wireless router. Plug a wireless receiver (like Netgear or Belkin) into a USB port on the computer. The Belkin will come with instructions, software and a default password (on the bottom or the router). Install the CD drivers and follow the prompts.

Apr 03, 2011 | Computers & Internet

1 Answer

I have one modem, one router and four computers. I would like to wire one of my computers to the modem for ethernet internet access and a router to the same modem for wifi. Can I do this? All Mac...


yes just need a wireless router this regular have 3 or 4 ethernet conectors for computers for network cable , conect your modem to your new wireless router

Nov 15, 2010 | RCA Thomson Digital Cable Modem (DCM305R)

1 Answer

I dont have the drivers for NETGEAR 54 Mbps wireless Router WGR614 v7. I want to connet my BroadBand connection to my Router I want to use my LAPTOP without wireless. kindly assist me about the...


Hello, I dont think you need the drivers for Router. And first of all you need to connect your modem to your router through ethernet cable. And after connecting your modem, configure your wireless router by typing this IP address in internet explorer: 192.168.1.1 The user id is admin and the password is password. Then detect your broadband connection by using the option in the router. Try connecting your Laptop to wifi after setting the connection.

Nov 02, 2010 | NetGear WGR614 54Mbps Wireless Router...

1 Answer

PS3 and thompson ST585v6


So the WLAN is red, it means that there's no wireless connection from your router.

I might advise you to reconfigure the RCA on the wireless settings.

for the PS 3 there are port that you can gather with your PS 3 manufacturer to open on the router, it might help the PS 3 to go online simultaneously.

Mar 09, 2009 | RCA Thomson Digital Cable Modem (DCM305R)

1 Answer

Mac and Thompson router


I've run into cable modems that don't like to use ethernet sometimes. In cases like this, I have to do a soft reset of the modem and things usually work again.

To do a soft reset, do the following:
  1. pull the power cord from the modem
  2. count to 5
  3. hold down the power button on the modem
  4. plug back in the power
  5. count to 30 while holding the power button (the modem should be blinking a lot)
  6. release the power button and see what happens.

Jan 14, 2008 | RCA Thomson Digital Cable Modem (DCM305R)

1 Answer

SPEEDTOUCH 576 WIRELESS MODEM driver


HERE is the manufacturer main link to download driver.

page also has manual on installing it and config modem properties.

 

http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=511

Oct 16, 2007 | RCA Thomson Digital Cable Modem (DCM305R)

2 Answers

Thomson SpeedTouch 576 wireless modem router


Connect your wireless modem router Sign on to AOL. Download the AOL Easy Installer for Thomson 576 Wireless Modem Router. When prompted to save the file to a location select an appropriate place (desktop is a good example). Once the AOL Easy Installer is downloaded, double click the file: ST_V1.exe This will launch the modem router installer and show the "Welcome" screen. Click the Start Installation button to continue. If you wish to cancel, click the Cancel Installation button. Read the next page carefully. The text advises to close any running programs, ensure to close your AOL software also. Click Next to continue. Please Note: Connect a DSL filter to each telephone socket that is in use for telephones, dial-up modems and fax machines, etc. If you require additional DSL filters, order online at AOL Keyword Broadband Extras. Notes: Ensure to use AOL 8.0 or above. The AOL account to be used for the modem router set up must be a General (18+) account. This installer is not supported with a modem router containing beta firmware.

Apr 24, 2007 | RCA Thomson Digital Cable Modem (DCM305R)

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...