Question about Onkyo HT-S5100 Theater System

1 Answer

Sub wont turn on - Onkyo HT-S5100 Theater System

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi aaron
First thing you may want to check is a.c power coming to the unit then at the back of the unit you should have a 3 positions switch that reads auto/off/on , put it at the on position, now you should have a green indicator L.E.D meaning power`s o.k.
If you still have nothing then look for a fuse holder with a slotted opening, get a flat screwdriver and turn the cap about a quarter of a turn counterclockwise and it should pop out.
Look at the fuse and you might see a broken filament inside or blackened glass, if it is the case you might try to replace it with a new one(fuses sometimes blow due to power surge or spike) but if it blows again, then you have a problem with either the power supply or amplifier board. If the fuse is o.k and all is connected right by the user manual then you are back with a power supply problem.
Hope this will help. Good luck

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sub wont come on. but all the outher speakers work fine . cant figure it out?


I assume this is connected to a AV Receiver? There is generally a low level sub out, with an RCA jack. That should go to your sub input. The old subs had the speaker outputs on the back of the receiver connected to the sub input, and all the other speakers were connected to the sub, but that system hasn't been used in decades.

Jan 24, 2015 | Audio Players & Recorders

1 Answer

My sub wont power off when I turn off my Yamaha RX-V673


The sub would have to be getting AC power from an outlet on the Yamaha

Jan 08, 2013 | Yamaha RX-V673

1 Answer

A2200 htc wont bump my subs and the fans never turn off


check your wiring's, there are two positive lines, one is directly connected to the batteries positive terminal and the remote positive is connected to the ignition's positive, and make sure it is properly grounded.

Jun 10, 2010 | AudioBahn A2300HCT Car Audio Amplifier

1 Answer

Hooked up subs in my 07 tahoe radio plays but truck wont start


when you turn off the radio and subs does the car start?

do other things work in the car like headlights indicators brake lights

i sugest you turn off the radio and start car or unplug the subs from the battery and try


Dec 31, 2009 | 2007 Chevrolet Tahoe

1 Answer

My yamaha rx-v565 wont turn my sub woofer on.It detects that it is there during setup but doesnt turn it on during music or movies.


make sure the switch on your sub is on, and also if there are no "sub signals" then it wont kick on tru listening/watching somthing with alot more bass to see if it kicks on

Dec 17, 2009 | Yamaha Rx-v565 Receiver

1 Answer

Sub wont work, all connectionsgood,cable good


If your front speakers are defined as small, the sub is locked to ON.

My $.02 regarding speaker size selection in this context. Generally speaking, if a speaker can adequately handle real bass, regardless of its apparent woofer size (like many Bose systems), I define it as Large and I also define the Sub as Plus so Low Frequencies will still be sent to the channel(s) they belong to along with the sub for those real deep tones.

Aug 22, 2009 | Pioneer VSX-D510 Receiver

1 Answer

SUBS NOT PLAYING THROUGH AMP


There is an otion to turn sub output on/off in the "audio menu". Hit " in lower left to turn sub out put on.

Mar 17, 2009 | Xtreme Sound WMS336 CD Player

1 Answer

Sub volume stays the same


in the back of head unit u might have 2 pre outs try swicthing them if u dont then on the amp u should have nobs turn them all the way up

Jun 16, 2008 | Kicker CVR12 Car Subwoofer

Not finding what you are looking for?
Onkyo HT-S5100 Theater System Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

The Knight
The Knight

Level 3 Expert

73647 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...