Question about KWorld 1680 TV BOX HIGH-RESOLUTION EXTERNAL LCD TV TUNER (Retail) (KW-TV1680R)

4 Answers

PIP function not working

Just set up KWorld 1680 - TV viewing functions are great. Res set at 1440/900. Computer on and can switch back and forth by turning Kworld box pwr on/off. With TV on - press PIP button and get a mid screen message "Out of Range!" Book is of no help. In PC mode I press PIP button and Kworl box LED changes for a second then back to slow flash - no message on screen. Any ideas?

Posted by on

  • 5 more comments 
  • Wuff Jan 11, 2008

    I am still getting the error message "Out of Range" regardless of what resolution or refresh rate I have set.

  • Anrui Jan 13, 2008

    Second. PIP function complaining about Out of Range. I've tried every resolution and every cord that I own to resolve this issue. I need my picture in picture so I can watch poorly done reality tv and browse poorly written news articles. :(

  • Anrui Jan 13, 2008

    I, too, am having the same issue, currently. I am loving the box; it lets me do all of the things I want, except the Picture in picture. Not having the main feature that I bought it for is killing me slowly. I've attempted to use all of the setting and resolutions, but, alas, nothing. Hopefully, soon, I'll be able to watch poorly done reality television and browse poorly written news articles very soon.

    Thanks for any help, in advance!

  • Wuff Jan 16, 2008

    I discovered the problem - I obviously cannot read directions! I spent all my time adjusting the KWORLD box resolutions...THE PROBLEM WAS MY COMPUTERS VIDEO RESOLUTION SETTINGS!! Once I set my computers video setting to 1444x900 the PIP works fine. My bad!

  • Vijay Sep 20, 2013

    try restarting u r comp n then keep pressing pip button

  • Vijay Sep 20, 2013

    1stturn u rtv tuner card, restart u r pc , keep pressing pip buttom...this wiill help u r problem of "out of range !"

  • Vijay Sep 20, 2013

    1st turn on tv with u r tuner card, then restart u r pc n keep pressing pip button, this'll fix u r "out of range !" problem ...

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

Try 1024*768 it really works on monitor for TV tuner pip mode

Posted on Apr 07, 2014

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hi !
I'll have the same problem, but i solve it when i change the RESOLUTION OF THE COMPUTER of 1680x1050 on 1440x900 at 60hz

TRY IT !

Posted on Feb 02, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

1st turn on tv with u r tuner card, then restart u r pc n keep pressing pip button, this'll fix u r "out of range !" problem ...

Posted on Sep 20, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,601 Answers

At 1440X900 the monitors refresh rate should be 60hz.

Posted on Jan 11, 2008

  • Thomas Christopher
    Thomas Christopher Jan 12, 2008

    Do you have the latest video adapter drivers installed?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont project from laptop


Your laptop has to be set to an external display. On your laptop hit and hold the function key (fn) while hitting the (f4) key. This will enable you to switch to multiple monitor displays.

Oct 31, 2013 | KWorld Televison & Video

1 Answer

I have a sony (model KP61V75) a split screen came on (two pictures) and I cannot figure out how to get it back to one screen. Im going crazy!


Some television remote controls have a PIP OFF button, while others only have a PIP button that needs to be pressed repeatedly until the PIP/Twin-View window disappears.


NOTES:

  • Some Sony rear projection televisions have a FLASH FOCUS button that will turn off the PIP/Twin-View feature.

  • Some Sony universal remote controls, if programmed to operate a Sony TV, can disable the PIP/Twin-View feature by pressing the REC or ENT button.

  • If the original TV remote control is not available or is not functioning properly, auto programming the television tuner orperforming a power reset may deactivate the PIP/Twin-View feature.

  • If pressing the appropriate buttons on the TV remote control does not work, then the PIP/Twin-View window might be from a two-tuner cable or satellite set-top box. If this is the case, use the remote control provided with the set-top box to remove the PIP/Twin-View window.

Jan 25, 2011 | Sony Televison & Video

1 Answer

Resolution is out of range.. when i switch on the computer and tried to switch on tv card then " input no support " appears...how can i resolve this


Maybe the resolution you set on the tv tuner is higher than the monitor's resolution, thus the error in displaying the tv. After you turn on the tv tuner, try to change the resolution from the remote control several times, maybe you can find one that your monitor can handle. Good luck!

Dec 09, 2010 | KWorld 1680 TV BOX HIGH-RESOLUTION...

2 Answers

I have a sony trinitron XBR and the PIP won't turn off. Any help is greatly appreciated.


Please make sure that one input is connected to the UHF/VHF port of the TV and other is connected to composite or component ports. If you have connected likewise, please perform the steps below:
  1. Ensure the video source is turned on.
  2. Ensure the video source is connected to an available VIDEO input jack on the back of the television. IMPORTANT: The VIDEO 5 input cannot be used to view a program in the PIP window.
  3. On the television remote control, press the TV FUNCTION button.
  4. On the television remote control, in the PIP section, press the TV/VIDEO button to select the appropriate video input for the PIP window.
  5. If the issue is not resolved, connect the Audio/Video (A/V) cable from the video source to a different VIDEO input jack on the television.
  6. On the television remote control, in the PIP section, press the TV/VIDEO button to select the appropriate video input for the PIP window.
  7. If the issue is not resolved, replace the A/V cable.

Sep 15, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

The tv screne picture on my insignia tv is off centered and is split in two


I suppose your TV has a PIP function.
  • check if u have a PIP function on your remote control or
  • Go to the Menu n in the display see if u can see the PIP function or the Aspect Ratio function like 4:3 or 16:9.
  • You have to switch it to standard or normal view to change to one full picture.

Jun 04, 2009 | Insignia NS-LCD19 19 in. LCD TV

1 Answer

PIP not working


The problem is that if you are using the HDMI (digital) input you cannot display an analog picture at the same time. In other words you cannot mix digital and analog so you have to use all digital (pc and HDMI or all analog( composite, s-video, component low res.)

Mar 13, 2009 | Televison & Video

2 Answers

PIP on old panasonic tv only shows the channel you are watching


Determine your exact model - there should be a sticker on the back.
Similar to: CT32HX40B, CT32HC43G, CT32S20U, etc, etc.

Go to below link and download the appropriate PDF for your model.
(Tip: Set page to " Show All Rows" for ease of use.
http://service.us.panasonic.com/operman/findmanual.aspx?cat=DTV

Depending on your source input (Cable, Antenna, both) - the PIP instructions will vary.

Note: The PIP is not all it is cracked up to be anyway, so you may be wasting your time, also if you get the PIP in a stuck mode... See the link to fix it: http://www.fixya.com/support/t664989-turn_off_panasonic_pip


Jan 03, 2009 | Panasonic CT-36HL43 36" TV

1 Answer

How do you get the pip function to work? please in laymans terms.


Hi myffee

There should be settings for the PIP in your Menu.

If there isn't , please notify me and I will send you more info.

Apr 28, 2008 | NEC - 42" Commercial Plasma Screen ****(no...

2 Answers

Laptop


did u try yet does yoru labtop usb 2.0 ready what model of pc and dl latest drivers for it ?

Jan 06, 2008 | KWorld PCTV CONVERTER KW-PCTV-1600 RT...

Not finding what you are looking for?
KWorld 1680 TV BOX HIGH-RESOLUTION EXTERNAL LCD TV TUNER (Retail) (KW-TV1680R) Logo

1,759 people viewed this question

Ask a Question

Usually answered in minutes!

Top KWorld Televison & Video Experts

kenwal

Level 1 Expert

4 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Greg Ulan

Level 2 Expert

191 Answers

Are you a KWorld Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...