Cannot disable the wireless password in ASUS router

1. Hardwired your computer to the router.2. Go to Command Prompt and type ipconfig.
3. Get the Ethernet adapter Local Area Network Default Gateway.
4. Open Internet Explorer and type the Default Gateway. Type admin for username and password.
5. Click Wireless Tab and change the wireless password.

If you're using Windows, plug the ASUS device in via wired (ethernet). Hit Start, then type in CMD, then type in ipconfig. Look for wired local area connection. Do you see 10.0.1.1? That's probably the ASUS. Now, type that in your browser. Voila, the GUI should pop up. It worked for me.

i want to change my asus wireless router password

Open a browser. Type in the router IP 192.168.1.1. Login to the router using your user id and password. If you have never set up a user id or password, then use the factory default ones to access. Once into the router settings, change the admin password to avoid anyone later accessing the router and changing your settings. Once you save the admin password change, you will be kicked out and must login again with the new password. Once in, go to wireless settings. Here you will able to set a wireless password (security key) for your wireless LAN. Once you save and exit, you will need to go to all your wireless devices and modify them with the security key in order for them to access the network. Once the key is in the router, your network is secure from outsiders getting in without knowing the key.

You need to enable WEP or WPA or WAP in wireless security. For that access your wireless router with below method. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless then wireless security then enable WEP security enter Password then apply and save settings then restart router . Then only those can connect who know that password. . Let me know if you need further assistance. Thanks for using FixYa.

Hi,

In order to access the web interface of the router you should know the IP address of the router. Please try the following steps to check the ip address on the computer which is connected with the router (wired/wireless doesn’t matter).

1. Click on start the go to run and try cmd and click on ok.
2. Type ipconfig and press enter.
3. look for the default gateway numbers.

the default gateway is the address of the router. Open internet explorer and type http://default gateway numbers (for example http://192.168.1.1)

It should take you to the web interface of the router on which authentication is needed. The default user name and password is admin and admin.

Let me know if it help.

Rashish

I am curious since i could not contact you in our online chat. I am curious if your issue is resolved please message me here if this is the case.

on the asus in the tool bar right click the wireless icon then choose view wireless a netwrok should appear then choose connect
if no networks appear on same page click to refresh network list once you have a network then click to connect.
I think the problem is diue to interference as you said you live in an apartment.
You can get a better router system or have someone come in and configure the one you have and make it a secure connection with password

I just went to the properties on my wireless connection, went to the "wireless" tab, and switched the encryption type from WEP to WPA and now my wireless works.