Question about Panasonic KX-T7630 Corded Phone

1 Answer

Changing time (ie. clock) and changing names of lines

We have about 9 phones at our office and I need to change the time set on them (its about 10mins slow).
Also, each desk phone has a name stored. We've had 3 staff changes I need to change their name. How do I do this?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers
Re: changing time (ie. clock) and changing names of lines

Hi Michelle,
To change the time you need to press the 'Prog' button, then press the * key twice, so '**' then enter '1234' then enter '000' then press the 'enter' button (located bottom right hand corner of phone) and this will allow you to change time accordingly.
To change extension name, press 'Prog' button, then press the * key twice (as above), then enter '1234' then enter '000', then enter '004' then press 'enter' button (as above), this should then get you to the spot where you can change the name.

Posted on Feb 01, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hi We have a Nortel T7316E phone system. Staff

Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344 (with the handset in its cradle).When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on. (i.e 202)
Then press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name(Traci).
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Winston = 9 -> 4,4,4 -> 6,6 -> 7,7,7,7-> 8-> 6,6,6-> 6,6
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Sep 05, 2013 | Panasonic KX-T7730 Corded Phone

1 Answer

Display Clock

Changing the time on a Norstar system must be done using a display phone. Using a M7310, M7324, or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.

1.- To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
2.- Enter password (default = 266344) - display should read "Terminals & Sets"
3.- Press "NEXT"(bottom right arrow) 5 times - display should read "Time and Date"
4.- Press "SHOW" (top right arrow)- display should read "Hour:___"
5.- Press softkey "CHANGE"
6.- Enter hour - display should read "AM OK or Change"
7.- Select AM or PM
8.- Press "NEXT"(bottom right arrow) - display should read "Minutes:___"
9.- Press softkey "CHANGE"
10.- Enter minutes
11.- Press "NEXT"(bottom right arrow) - display should read "Year:___" 12.- Press softkey "CHANGE"
13.- Enter year
14.- Press "NEXT"(bottom right arrow) - display should read "Month:___"
15.- Press softkey "CHANGE"
16.- Enter month
17.- Press "NEXT" (bottom right arrow)- display should read "Day:___"
18.- Press softkey "CHANGE"
19.- Enter day
20.- Press "NEXT" (bottom right arrow)
21.- Press the Rls key

Apr 01, 2010 | NorStar M7324 Corded Phone

2 Answers

Re-set date and time on display

Have you tried:

Feature **23646 password 23646 (if you phone admin hasn't changed this) and then select set day& time then change there

Feb 23, 2009 | NorStar M7208 Corded Phone

3 Answers

Change name on a Nortel M7324

1. Press the Rls button then ** FEATURE 266344 (CONFIG)
2. Password is 23646 (ADMIN) The display reads Terminals & Sets
3. Press SHOW ans enter the Extension for which you want to enter a name.
4. Press SHOW, again
5. Press the NEXT key until the display reads NAMES at the top left corner.
6. The bottom right corner reads CHANGE, press the far right soft key.
7. To move from one letter to the next use the far right and far left soft keys or the # key.
8. When you are finished Press next.
9. Press the HEADING key to get back to TERMINALS & SETS and start again!

Navigation Keys: Line 1 = HEADING Speed Dial = SHOW
Line 2 = BACK Last No. = NEXT

This can only be done from the main handset and only one at a time. The Soft Keys are the three small buttons right bellow the screen.

Jan 28, 2009 | NorStar M7324 Telephone

1 Answer

Need to change the names on display within the office alls

You have to go into programming under sets, and change the name. If you are unsure how do get into the system admin, then I would call a professional in, as you can do more harm....

Dec 17, 2008 | NorStar Meridian M7310 Phone

3 Answers

Lost my owners manual

Press "feature" 0 0 next press the left intercom button 2 times then press #103 (do this from extension 10 or 11)

enter the new time in 24 hour 2:15 would be 1415 then exit programming by pressing "feature" 0 0 again.

Hope this helps.

Mar 17, 2008 | Lucent PARTNER18 Corded Phone

7 Answers

Change time on nec dterm80 phone

Press the "Speaker" button and enter 728 on the key pad. Then enter the correct time in 24 hour format. For example at 2.56 p.m. type 1456. Then press speaker again and you're done

Jan 17, 2008 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

Correcting time on phone

Your system clock is displayed on all phones - so your system's time is off. If you have Caller ID, you can have the system set to adjust the clock daily according to Caller ID, but that often gets worse, depending on the telephone company. I've even seen some systems off by four hours or more, so we don't recommend that either.

If you have programming access to the system, the system clock is setting 000.

Our servers adjust the clocks automatically every weekend to the accuracy of the Naval Observatory's Atomic Clock - probably the same clock your boss's computer is using. It is part of our support contract service...

We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.

Jan 08, 2008 | Panasonic KX-T7633 Corded Phone

1 Answer


Your clock on your telephone is displaying the "system time" which can be changed at the attendant console the receptionist uses. Go to the console and push the FUNCTION KEY, then press ATT FUNCTION, then press SET TIME, enter the current time using four digits, ie. 09:30, then press PM if applicable, then press SET. SET will only appear as an option if the time has been enteed correctly, you can use the back arrow button to make corrections. Then push EXIT.

Nov 06, 2007 | Mitel Superset 420 Corded Phone

3 Answers


You have to use the feature 9 # from the administrators phone (usually extension 100)
Go to extension 100, press "feature,9,#" and you'll see the numbers on your display blinking like a digital alarm clock. Enter the time and then press feature to complete.

Oct 11, 2007 | NEC DTU 8D-2 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7630 Corded Phone Logo

756 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts


Level 3 Expert

94039 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides